Icom IC-7100 Instruction Manual - Page 11
Controller — Function display, Mode: FM, QUICK TUNING ICON
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
1 PANEL DESCRIPTION Controller - Function display q w e rt y u i q TX ICON Indicates either the displayed frequency can be transmitted, or not appears while the operating frequency is in an amateur band appears while the operating frequency is not in an amateur band. However, when the "Band Edge Beep" item is set to "OFF" in the "Function" Set mode (p. 6-5), " " does not appear. SET > Function > Band Edge Beep ➥➥"LMT" appears while the output power is decreased because the Power FET's temperature is high. ➥➥"HOT" appears while transmission is inhibited because the Power FET's temperature is too high. w MODE ICONS (p. 3-17) ➥➥Displays the selected operating mode. • "-D" appears when SSB data, AM data or FM data mode is selected. ➥➥Touch to enter the Mode selection screen. • On the Mode selection screen, touch the block to select the operating mode. e PASSBAND WIDTH ICON (AI sec. 5) Graphically displays the passband width for twin PBT operation and the center frequency for IF shift operation. r TONE SQUELCH/DIGITAL SQUELCH ICONS (Mode: FM) ➥ "TONE" appears when the repeater tone function is ON. (AI sec. 4) ➥ "TSQL" appears when the tone squelch function is ON. (AI sec. 4) ➥ "DTCS" appears when the DTCS function is ON. (AI sec. 4) (Mode: DV) ➥ "DSQL" appears when the digital call sign squelch function is ON. (AI sec. 9) ➥ "CSQL" appears when digital code squelch func- tion is ON. (AI sec. 9) t IF FILTER ICON (AI sec. 5) ➥➥Shows the selected IF filter. ➥➥Touch to select one of three IF filter settings. • T he selected filter passband width and shifting value are displayed for 2 seconds in the window. ➥➥Touch for 1 second to display the "FILTER" screen to adjust the filter passband width. ➥➥When the "FILTER" screen is displayed, touch for 1 second to return to the previous screen. y QUICK TUNING ICON (p. 3-8) Appears when the Quick tuning mode is selected. • W hen "Z" is displayed, the frequency changes in preset kHz or 1 MHz quick tuning steps. • W hen "Z" is not displayed, the frequency changes in 10 Hz or 1 Hz steps. u GPS ICON (AI sec. 10) ➥ Appears when valid position data is received from a GPS receiver that is connected to the [DATA1] jack. ➥ Blinks when invalid data is received from the GPS receiver. i SD CARD ICON ➥➥" " appears when an SD card is inserted and " " alternately blinks while accessing the SD card. 1-7