Icom IC-7100 Instruction Manual - Page 18
Main unit — Front panel, SD CARD SLOT [SD CARD] - problems
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
1 PANEL DESCRIPTION Main unit - Front panel q w q COOLING FAN This is a cooling fan for heat dissipation. Depending on the internal temperature, it rotates at a Low, Mid or High speed. w SD CARD SLOT [SD CARD] Insert an SD card of up to 32 GB SDHC. See AI sec. 13 for details. Main unit - Rear panel w e r t q y !4 !3 !2 !1 !0 q A NTENNA CONNECTOR 1 [ANT1] w A NTENNA CONNECTOR 2 [ANT2] (p. 2-2) Connect a 50 ø antenna with a PL-259 plug con- nector. • [ANT1] is used for the HF, 50/70 MHz frequency bands. • [ANT2] is used for the 144/430 MHz frequency bands. • [ANT1] is used below 74.8 MHz, and [ANT2] is used for 74.8 MHz or above. When using an optional AH-4 or AT-180 hf/50 mhz automatic antenna tuners, connect it to the [ANT1] connector. e GROUND TERMINAL [GND] (p. 2-2) Connect this terminal to ground to prevent electrical shocks, TVI, BCI and other problems. oiu r TUNER CONTROL SOCKET [TUNER] (p. 2-6) Connect the control cable from an optional AH-4 hf/ 50 mhz automatic antenna tuner. t DC POWER SOCKET [DC 13.8V] (p. 2-7) Connect 13.8 V DC through the supplied DC power cable. Rear panel view y CONTROLLER CONNECTOR [CONTROLLER] Connects to the Controller using with the supplied OPC-2253 Control cable. • T he OPC-2253 Control cable is 3.5 meter (11.5 feet) length. • D O NOT use any third party's Ethernet cables. 1-14