Icom IC-7100 Instruction Manual - Page 2

FOREWORD EXPLICIT DEFINITIONS Thank you for purchasing this fine Icom product. The IC-7100 hf/vhf/uhf all mode transceiver is designed and build with Icom's superior technology and craftsmanship combining traditional analog technologies with the new digital technology, Digital Smart Technologies for Amateur Radio (D-STAR), for a balanced package. With proper care, this product should provide you with years of trouble-free operation. We thank you for making your IC-7100 your radio of choice, and hope you agree with Icom's philosophy of "technology first." Many hours or research and development went into the design of your IC-7100. WORD R DANGER! R WARNING! CAUTION NOTE DEFINITION Personal death, serious injury or an explosion may occur. Personal injury, fire hazard or electric shock may occur. Equipment damage may occur. Recommended for optimum use. No risk of personal injury, fire or electric shock. FEATURES ❍ IF DSP features ❍ All mode capability covering 160-2 m and 70 cm (depending on version) ❍ Compact with separated front panel ❍ ±0.5 ppm of high frequency stability ❍ Baudot RTTY demodulator ❍ Selectable SSB transmission passband width (For both higher and lower pass frequency) ❍ Standard voice synthesizer/voice recorder ❍ SD card slot ready for several memory storage ❍ Voice recorder to records your communication ❍ DV mode (Digital voice + Low-speed data communication) operation-ready - Text message and call sign exchange - Transmit position data ❍ DR (D-STAR Repeater) mode and repeater list allow you to easily operate using a D-STAR repeater Spurious signals may be received near some frequencies. These are created in the internal circuit and does not indicate a transceiver malfunction. IMPORTANT READ ALL INSTRUCTIONS carefully and completely before using the transceiver. SAVE THIS INSTRUCTION MANUAL- This instruction manual contains important operating instructions for the IC-7100. FCC INFORMATION • FOR CLASS B UNINTENTIONAL RADIATORS: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and re- ceiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • C onsult the dealer or an experienced radio/TV technician for help. Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia and/ or other countries. CAUTION: Changes or modifications to this device, not expressly approved by Icom Inc., could void your authority to operate this device under FCC regulations. "AI" means "Advanced Instructions." "sec. MM" means section number. So when "(AI sec. MM)" is described on this manual, see the PDF type Advanced Instruction's section number for your reference. i