Icom IC-7100 Instruction Manual - Page 23

DDHM-151 (Option) 1 PANEL DESCRIPTION q w e r t SPCH /LOCK TUNER /CALL XFC V/M MW F-1 F-2 1.8 1 3.5 2 7 3 MODE 10 14 18 4 5 6 FIL 21 7 24 8 28 9 GENE . 50 144 430 F-INP 0 CE ENT Mic element y q SPCH/LOCK KEY [SPCH/LOCK] ❍ SPEECH KEY Operation (p. 3-20) Push to audibly announce the S-meter level, the displayed frequency and the operating mode. • The S-Level announcement can be turned OFF in the "S-Level SPEECH" item of the "SPEECH" Set mode. (p. 6-4) SET > SPEECH > S-Level SPEECH • W hen RIT is ON, the RIT offset is not included in the frequency announcement. ❍ LOCK KEY Operation (AI sec. 5) Hold down for 1 second to turn the Lock function ON or OFF. • T he function electronically locks the Dial. • " " appears when the function is ON. • Y ou can select the Dial lock and Panel lock in the "Lock Function" item of the "Function" Set mode (p. 6-6). SET > Function > Lock Function w PTT SWITCH [PTT] (p. 3-23) Hold down to transmit, release to receive. e UP/DOWN KEYS [Y]/[Z] Change the operating frequency. • Hold down to continuously change the frequency. • If the Quick tuning icon is not displayed, the tuning step is 50 Hz. r TRANSMIT LED Lights red while transmitting. t KEYPAD ➥➥Pushing a key selects the operating band. • [(GENE)•] selects the general coverage band. ➥➥Pushing the same key 2 or 3 times calls up other stacked frequencies in the band. • Icom's triple band stacking register memorizes 3 frequencies in each band. ➥➥ After pushing [(F-INP)ENT], enter a numeric frequency, then press [(F-INP)ENT] again. • Example: To enter 14.195 MHz, push [(F-INP)ENT] [1] [4] [•] [1] [9] [5] [(F-INP)ENT]. y FILTER SELECTION KEY [FIL] ➥➥Push to select one of three IF filter settings. • T he selected filter passband width and shifting value are displayed for 2 seconds in the window. ➥➥Push for 1 second to display the "FILTER" screen to adjust the filter passband width. ➥➥When the "FILTER" screen is displayed, push for 1 second to return to the previous screen. 1-19