Icom IC-7100 Instruction Manual - Page 31
Power Supply Connections, ◇ Connecting the PS-126 power supply
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2 INSTALLATION AND CONNECTIONS Power Supply Connections Make sure the [POWER] switch is OFF before connecting the DC power cable. • W e recommend using Icom's optional power supply (PS-126: DC13.8 V/25 A). DDConnecting the PS-126 power supply Use the attached AC cable to connect to AC outlet. Rear panel PS-126 GND To [DC 13.8V] The transceiver needs followings: • DC 13.8 V (Capacity: 22 A and over) • A power supply with an over current protective line and with a less voltage fluctuation or ripple DDConnecting a non-Icom DC power supply Connect the black DC power cable to the (-) Negative terminal, and the red DC power cable to the (+) Positive terminal. Rear panel AC outlet Stabilized power supply GND DC power socket Fuse holder RED BLACK OPC-1457 For European versions Connect to power supply GND DC power socket OPC-2095 RWARNING! (About DC power supply) • Make sure DC power cable polarity is correct. Red: Positive + terminal Black: Negative - terminal • N EVER cut the DC power cable between the DC plug and fuse holder. • D O NOT use unattached or undesignated DC power cable. • D O NOT forcibly pull or bend the DC power cable. Install the devices far enough from the place where people might put things or step on the DC power cable. 2-7