Icom IC-7100 Instruction Manual - Page 39
Setting frequency, ◇ Tuning with the Dial
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Setting frequency You can select the transceiver's frequency by using the Dial, or you can enter it on the Direct input screen. DDTuning with the Dial q O n the Band selection screen, select the desired frequency band. (p. 3-6) w R otate the Dial to set the desired frequency. • The default tuning step differs, depending on the operating mode, frequency band and a version. 3 BASIC OPERATION Dial If the frequency cannot be changed: Check the Lock function, and if it is ON, " " is displayed, and the Dial does not function. In this case, hold down SPEECH (R) for 1 second to turn OFF the Lock function. When "LOCK/SPEECH" is selected in the "[SPEECH/ LOCK] Switch" item of the "Function" Set mode, pushing [SPEECH/LOCK] turns OFF the lock function. (p. 6-6) SET(C) > Function > [SPEECH/LOCK] switch Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) 3-7