Icom IC-7100 Instruction Manual - Page 43
◇ Direct frequency input, To enter the 14.025 MHz frequency
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
3 BASIC OPERATION Setting frequency (Continued) DDDirect frequency input The transceiver has a Direct input screen for direct frequency entry, as described below. • Operating frequency input qqTouch the MHz digits to enter the Band selection dis- play. wwTouch [F-INP](D) to enter the Direct input screen. eeTouch the desired number to enter the desired fre- quency. • If a most significant digit is inputted, it will be displayed at the 10 Hz digit, and then next digit is inputted, a display will be shifted to left side one by one. • If the numbers for the MHz digits are inputted, and then "." is touched, the inputted numbers will be shifted to the MHz digits. rrTouch [ENT](D) to input the frequency. • If a most significant digit is inputted, it will be displayed at the 10 Hz digit, and then next digit is inputted, a display shifts to left side one by one. • W hen not having inputted below a 100 kHz digit, touch [ENT](D) to set all uninputted digits to "0." • If desired, touch "CE" to delete entering. • If desired, touch [](D) or push MENU (C) to exit the Direct input screen. [Example] To enter the 14.025 MHz frequency: ➥➥Touch [1], [4 0], [2], [5] then [ENT]. To enter the 18.0725 MHz frequency: ➥➥Touch [1], [8 0], [7], [2], [5] then [ENT]. To enter the 706 kHz frequency: ➥➥Touch [0 7], [0], [6] then [ENT]. To enter the 5.100 MHz frequency: ➥➥Touch [5 1] then [ENT]. To enter the 7.000 MHz frequency: ➥➥Touch [7] then [ENT]. To change the 21.280 MHz to 21.245 MHz: ➥➥Touch 2], [4], [5] then [ENT]. Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) Touch the MHz digits Touch [F-INP] • Direct input screen Enter a "." decimal point, or minus (-) input for Split offset Shows the input digits Enter the Split offset Enter the Memory channel Enter the frequency Cancel edit Delete entering 3-11