Icom IC-7100 Instruction Manual - Page 68

Capturing a call sign, Set the received call sign to the destination, Hold down [PTT] to transmit

Get Icom IC-7100 PDF manuals and user guides View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

5 D-STAR OPERATION Capturing a call sign After you receive the repeater's signal, the calling station's call sign can be captured by holding down the Call Sign Capture key AUTO TUNE RX�CS (R). Then you can quickly and easily reply to the received call. 1. Set the received call sign to the destination Hold down AUTO TUNE RX�CS (R) for 1 second. • After releasing, beeps sound, and the station call sign is an- nounced if the RX>CS Speech function is set to ON in the "SPEECH" Set mode. SET (C) > SPEECH > RX>CS SPEECH • If you want to select another call sign in the RX history, rotate [DIAL] while holding down AUTO TUNE RX�CS (R). NOTE: When a received signal is weak, or during DR mode scanning, the call sign may not be received correctly. In that case appears, an error beep sounds, and a quick reply call cannot be made. 2. Hold down [PTT] to transmit • W hile holding down [PTT], the TX/RX indicator lights red. NOTE: Push AUTO TUNE RX�CS (R) or DR (C), or touch "FROM" on the DR mode screen to cancel the Call Sign Capture mode, and return to the previous call sign setting. Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) While receiving When receiving a call from "JG3LUK." While holding down AUTO TUNE RX�CS (R) Beeps JG3LUK AUTO TUNE RX�CS After releasing AUTO TUNE RX�CS (R) Appears after selecting a call sign. Transmitting 5-6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
5
D-STAR OPERATION <BASIC>
5-6
After you receive the repeater’s signal, the calling sta-
tion’s call sign can be captured by holding down the
Call Sign Capture key
AUTO TUNE
RX
�
CS
(
R
). Then you can
quickly and easily reply to the received call.
Capturing a call sign
Set the received call sign to the destination
1.
Hold down
AUTO TUNE
RX
�
CS
(
R
) for 1 second.
• After releasing, beeps sound, and the station call sign is an
-
nounced if the RX>CS Speech function is set to ON in the
“SPEECH” Set mode.
SET
(
C
) > SPEECH >
RX>CS SPEECH
• If you want to select another call sign in the RX history, ro
-
tate [DIAL] while holding down
AUTO TUNE
RX
�
CS
(
R
).
NOTE:
When a received signal is weak, or during
DR mode scanning, the call sign may not be received
correctly. In that case, “--------” appears, an error
beep sounds, and a quick reply call cannot be
made.
Hold down [PTT] to transmit
2.
• While holding down [PTT], the TX/RX indicator lights red.
NOTE:
Push
AUTO TUNE
RX
�
CS
(
R
) or
DR
(
C
), or touch
“FROM” on the DR mode screen to cancel the Call
Sign Capture mode, and return to the previous call
sign setting.
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay
AUTO TUNE
RX
�
CS
When receiv-
ing a call from
“JG3LUK.”
Beeps
JG3LUK
Appears af-
ter selecting
a call sign.
While receiving
While holding down
AUTO TUNE
RX
�
CS
(
R
)
Transmitting
After releasing
AUTO TUNE
RX
�
CS
(
R
)