Icom IC-7100 Advanced Instructions - Page 10
DR MODE KEY, QUICK MENU KEY, CS KEY, Mode: CW, when the DR mode is selected - gps
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Previous view 1 PANEL DESCRIPTION Controller - Front panel (Continued) PWR AF RF/SQL i7100 TX / RX CLR M-CH BANK PBT RIT RIT TUNER/CALL MENU NB NR MIC/RF PWR SPEED/PITCH P.AMP ATT NOTCH DR SET QUICK AUTO TUNE RX�CS SPEECH XFC MPAD !7 !8 !9 @0 @1 !7 DR MODE KEY DR (section 7,8,9) ➥ Push to select the DR mode. • When the DR mode is selected, the transceiver automatically selects the DV mode. ➥ In the DR mode, push to cancel it. • The transceiver returns to the previous screen before entering the DR mode. !8 SET MODE KEY SET (section 17) ➥ Push to enter or exit the SET mode. • "Voice Memo," "Call Sign," "RX History," "DV Memory," "My Station," "DV Set," "GPS," "SPEECH," "QSO/RX Log," "Function," "Tone Control," "Connectors," "Display," "Time Set," "SD Card" and "Others" set group are selectable. !9 QUICK MENU KEY QUICK ➥ Push to open or close the Quick Menu window. • The Quick Menu is used to quickly select various functions. ➥ In the setting screen, push to open the Default set window. • Touch "Default" to reset to the default setting. @0 AUTO TUNE•RXCS KEY AUTO TUNE RX�CS ❍ AUTO TUNE KEY Operation (p. 4-5) (Mode: CW) ➥ P ush to automatically adjust for a zero beat with the received signal. Zero beat means that two signals are exactly the same frequency. • "AUTO TUNE" blinks when the auto tune function is activated. • When the RIT function is ON, the auto tune function changes the RIT frequency, not the displayed frequency. ❍ RX CALL SIGN CAPTURE KEY Operation (p. 8-7) (Mode: DV, when the DR mode is selected) ➥ P ush to open the "RX>CS" screen. Push again to return to the previous screen. ➥ H old down for 1 second to set the received call signs (station and repeaters) as the operating call sign. @1 TRANSMIT FREQUENCY CHECK KEY XFC ➥ During split frequency or repeater operation, hold down to listen to the transmit frequency. (p. 4-28) • While holding down this switch, the transmit frequency can be changed with the Dial or MPAD . • When the Split Lock function is turned ON in the Split operation, hold down XFC to cancel the Dial lock function. (p. 6-10) ➥ When operating simplex, hold down to monitor the frequency. • While holding down this key, the squelch is open and the interference reject functions are temporarily turned OFF. ➥ When operating simplex and the RIT function is turned ON, hold down to listen to the transmit frequency. The frequency is the same as when the RIT is OFF. ➥ In the DV mode, hold down this key to select the RX monitoring mode. (p. 17-13) 1-6