Icom IC-7100 Advanced Instructions - Page 112
Break-in function, Semi Break-in operation
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Previous view 6 FUNCTIONS FOR TRANSMIT Break-in function (Mode: CW) The Break-in function is used in the CW mode to automatically toggle the transceiver between transmit and receive when keying. The IC-7100 is capable of Full Break-in or Semi Break-in. Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) DDSemi Break-in operation During Semi Break-in operation, the transceiver immediately transmits when you key down, then returns to receive after a preset delay time has passed after you stop keying. qqSelect the desired frequency band. (p. 3-6) wwOn the Mode selection screen, select the CW or CW-R mode. (p. 3-17) eePush MENU (C) one or more times to select the "M-3" screen (M-3 menu). rrTouch [BK-IN](D) one or more times to turn ON the Semi Break-in function. • "BKIN" appears. ttWhen the "M-3" screen (M-3 menu) is selected, touch [BK-IN](D) for 1 second to display the "BK-IN" screen. yyRotate the Dial to select the desired option. • If desired, touch [DEF](D) for 1 second to reset to the default setting. uuPush MENU (C) to exit the "BK-IN" screen. Semi Break-in icon Touch [BK-IN] Touch [BK-IN] for 1 second Touch for 1 second to reset to default Shows break-in delay time 6-3