Icom IC-7100 Advanced Instructions - Page 127
Transmitting DTMF code
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Previous view 6 FUNCTIONS FOR TRANSMIT DTMF memory encoder (Continued) DDTransmitting DTMF code To transmit DTMF code using a DTMF send window, program the desired code in advance. qqSelect the desired frequency band. (p. 3-6) wwOn the Mode selection screen, select the FM or DV mode. (p. 3-17) • The DTMF encoder can be used in the FM or DV mode. eePush MENU (C) one or more times to select the "M-3" screen (M-3 menu). • If your are operating in the DR mode, push MENU (C) once or twice to select the "D-2" screen (D-2 menu). rrTouch [DTMF](D) to display the DTMF mode. • The "DTMF" screen is displayed. ttTouch [SEND](D) to open the DTMF send window. yyTouch the desired channel to transmit the DTMF code. • The transceiver automatically transmits the selected DTMF code. • While transmitting, touch [SEND], [EDIT] or [SET](D) or push MENU (C), SET (C) or XFC (R), cancels the transmission. • After transmitting, transceiver returns to the "DTMF" screen. Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) • While transmitting Touch [DTMF] Touch [SEND] Touch the DTMF channel Example: d0 Highlighted while transmitting The DTMF code scrolls to the left edge, and disappears every one digit when the each digit is sent. 6-18