Icom IC-7100 Advanced Instructions - Page 128

Previous view 6 FUNCTIONS FOR TRANSMIT DTMF memory encoder (Continued) DDTransmitting DTMF code (Direct Input) qqSelect the desired frequency band. (p. 3-6) wwOn the Mode selection screen, select the FM or DV mode. (p. 3-17) • The DTMF encoder can be used in the FM or DV mode. eePush MENU (C) one or more times to select the "M-3" screen (M-3 menu). • If your are operating in the DR mode, push MENU (C) once or twice to select the "D-2" screen (D-2 menu). rrTouch [DTMF](D) to display the DTMF mode. • The "DTMF" screen is displayed. ttTouch [SEND](D) to open the DTMF send window. yyTouch "Direct Input" to display the "DTMF DIRECT INPUT" screen. uuTouch the number or character to enter the desired DTMF code. iiWhen all digit are set, touch [TX](D) to transmit the code. • The transceiver automatically transmits the DTMF code. • While transmitting, touch [SEND], [EDIT] or [SET](D) or push MENU (C), SET (C) or XFC (R), cancels the transmission. • After transmitting, transceiver returns to the "DTMF" screen. Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) Move the cursor • While transmitting Touch [DTMF] Touch [SEND] Touch "Direct Input" Move the cursor Delete a number Transmit the code Cancel edit Touch [TX] Highlighted while transmitting 6-19 The DTMF code scrolls to the left edge, and disappears every one digit when the each digit is sent.