Icom IC-7100 Advanced Instructions - Page 13
Information Readout, Mode: Ssb-d/cw/rtty - icon
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Previous view 1 PANEL DESCRIPTION Controller - Function display (Continued) !8 !7 o !0 !1 !2 !3 !4 !5 !6 o CLOCK READOUT Shows the current time. • UTC time or local time can be selected. !0 SPLIT ICON (p. 6-8) " " appears when the Split function is turned ON. !1 LOCK ICON (p. 5-12) " " appears when the Lock function is activated. 1⁄4 TUNING DIAL SPEED ICON (p. 3-10) (Mode: SSB-D/CW/RTTY) " " appears when the tuning dial speed is set so that one rotation is equal to 1⁄4 of the normal rotation. • This function is selectable only when the quick tuning function is turned OFF. !2 FREQUENCY READOUTS ➥➥Displays the operating frequency. ➥➥Touch the MHz digits to enter the Band selection screen. ➥➥Touch the MHz digits for 1 second to turn the 1 MHz quick tuning mode ON or OFF. ➥➥Touch the kHz digits to turn the preset kHz quick tuning mode ON or OFF. ➥➥Touch the kHz digits for 1 second to enter the Tuning step selection screen. ➥➥Touch the Hz digits to for 1 second to toggle between 10 Hz and 1 Hz steps. !3 VFO/MEMORY ICONS (p. 3-4) ➥➥"VFOA" or "VFOB" appears whether VFO A or VFO B is selected. ➥➥"MEMO" appears when the memory mode is selected. !4 MEMORY CHANNEL READOUT (p. 11-3) ➥➥Shows the selected memory channel, scan edge channel or Call channel. • Memory bank indicator (A to E) appears to the left of memory channel. ➥➥Touch to toggle between the VFO and Memory modes. !5 SELECT MEMORY CHANNEL ICON "" appears when the selected memory channel is set as a select memory channel. (p. 12-12) !6 INFORMATION READOUT Displays the transmit frequency of the Split opera- tion, descriptions of the memory channel or Received Call sign in the DV mode, and so on. !7 FUNCTION DISPLAY (p. 1-11) Shows the function of the Touch keys. • Push MENU to change the set of functions assigned to the touch keys. • Toggles the function display menu between M-1, M-2, and M-3 menus or D-1 and D-2 menus. !8 MULTI-FUNCTION METER INDICATION ➥➥Displays the signal strength while receiving. ➥➥Displays the relative output power, SWR, ALC or compression levels while transmitting. ➥➥When the Meter Peak Hold function is ON, the peak level of a received signal strength or the output power is displayed for approximately 0.5 seconds. ➥➥Touch to select the RF power, SWR, ALC or Compression meter. ➥➥Touch for 1 second to display the Multi-function meter. 1-9