Icom IC-7100 Advanced Instructions - Page 14
Mode: Ssb/cw/rtty/am, Mode: Ssb/am/fm, Mode: Dv, Function Icons
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Previous view 1 PANEL DESCRIPTION Controller - Function display (Continued) !9 !9 FUNCTION ICONS ➥➥"VOX" appears when the VOX function is activat- ed. (p. 6-2) ➥➥The Break-in icons appear when the Break-in function is turned ON. (p. 6-3) • "F-BKIN" appears when the Full Break-in function is turned ON. • "BK-IN" appears when the Semi Break-in function is turned ON. ➥➥The Preamp icons appear when a preamplifier is turned ON. (p. 5-2) • In the HF, 50/70 MHz frequency band, either "P.AMP1" or "P.AMP2" is displayed when preamp 1 or preamp 2 is ON. • In the 144/430 MHz frequency band, "P.AMP" is dis- played when the preamp is ON. ➥➥"ATT" appears when the Attenuator function is turned ON. (p. 5-2) ➥➥The AGC icons display the selected AGC time constant. (p. 5-3) • "AGC-F" for AGC fast; "AGC-M" for AGC mid; "AGC-S" for AGC slow; "AGC-OFF" for AGC OFF. • In the FM, WFM and DV mode, "AGC-F" for AGC fast is fixed. ➥➥"DUP+" appears when plus duplex, "DUP -" ap- pears when minus duplex (repeater) operation is selected. (p. 4-25) ➥ "RIT" and the shift frequency are displayed when the RIT function is turned ON. (p. 5-4) ➥➥" " appears when the Speech Compressor function is turned ON. ➥➥" " appears when the Noise Blanker function is turned ON. (p. 5-8) ➥➥" " appears when the Noise Reduction function is turned ON. (p. 5-9) ➥➥The Notch icons appear when the Notch filter function is turned ON. (p. 5-10) (Mode: SSB/CW/RTTY/AM) • " " appears when the Manual Notch function is turned ON. (Mode: SSB/AM/FM) • " " appears when the Automatic Notch function is turned ON. ➥➥" " appears when priority scan is turned ON. (p. 12-16) ➥➥" " appears when the VSC (Voice Squelch Control) function is turned ON. (Mode: DV) ➥➥" " appears when the EMR (Enhanced Moni- tor Receive) communication mode is selected. (p. 9-10) • In the EMR communication mode, no call sign setting is necessary when operating in the DV mode. ➥➥" " blinks when receiving an EMR signal. ➥➥" " appears when the BK (Break-in) function is turned ON. (p. 9-9) • The BK function allows you to break into a conversa- tion where the two other stations are communicating with call sign squelch enabled. ➥➥" " blinks when receiving a break-in call. 1-10