Icom IC-7100 Advanced Instructions - Page 145
Using the preloaded repeater list, Example, How to switch the repeater group
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Previous view 8 D-STAR OPERATION "FROM" (Access repeater) setting (Continued) DDUsing the preloaded repeater list When your access repeater is preloaded in your transceiver's repeater list, you can select it from the repeater list. By only selecting the repeater from the list, the call sign, frequency, duplex and offset frequency settings are automatically set for easy operation. Example: S elect the "Hirano" repeater in Japan from the repeater list. qqPush DR (C) to select the DR mode. wwCheck whether or not "FROM" is selected. • If "FROM" is not selected, touch the "FROM" field. eeTouch the "FROM" field. • The "FROM SELECT" screen appears. rrTouch "Repeater List." • The "REPEATER GROUP" screen appears. ttTouch the repeater group where your access repeat- er is listed. (Example: "11: Japan") yyTouch your access repeater to select the repeater area or name. (Example: "Hirano") • The transceiver returns to the DR mode screen, and the selected repeater is set in "FROM." Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) "FROM" is selected. How to switch the repeater group: ➥➥To switch the repeater group, while in the DR mode, push QUICK (C), and then touch "Group Select" Repeater area (Sub name) Touch "FROM." Touch "Repeater List." Touch the repeater group (Example: "11: Japan") Touch your access repeater. (Example: "Hirano") Repeater call sign The repeater list, described in this manual, may differ from your transceiver's preloaded list. 8-9 "Hirano" is set on "FROM."