Icom IC-7100 Advanced Instructions - Page 171
Automatic Reply function, To record the voice signal
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
Previous view 9 D-STAR OPERATION Automatic Reply function When a call addressed to your own call sign is received, the Automatic Reply function automatically replies with your call sign. (Default: OFF) Depending on the setting, the recorded message may be transmitted with the call sign. qqPush SET(C) to enter the Set mode. wwTouch the "Auto Reply" item of the "DV Set" Set mode. DV Set > Auto Reply • If the specified item is not displayed, touch [∫] or [√](D) one or more times to select the page. eeTouch the desired item to select "ON" or "Voice." • ON: Replies with your own call sign. (No audio reply is sent) • Voice: Replies with your call sign and any Auto Reply message recorded on the SD (up to 10 seconds). If no SD card is inserted or no message is recorded, only your call sign is transmitted. The transmitted audio can be monitored. rrPush SET(C) to exit the Set mode. NOTE: • W hen "ON" or "Voice" is selected, the Automatic Reply function is automatically turned OFF, when you push [PTT]. To record the voice signal You can record a voice announcement for the Auto Reply function in "DV Auto Reply" on the Set mode. (p. 17-12) SET(C) > Voice Memo > DV Auto Reply Touch "DV Set" Touch "Auto Reply" Touch "ON" Push SET Appears After receiving a call from "JG3LUK," the transceiver automatically sends a reply call. Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) 9-14 "TO" setting does not change, but "UR: JG3LUK (Caller's call sign)" is displayed.