Icom IC-7100 Advanced Instructions - Page 189
Repeater call sign programming, MHz: C no D-STAR repeaters in Japan
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
Previous view 9 D-STAR OPERATION Repeater list programming (Continued) 4. Repeater call sign programming When used for simplex communication, go to [7. Access repeater setting]. !6 Touch "CALL SIGN" to enter the repeater call sign edit mode. • A cursor appears and blinks. !7 Touch the desired block one or more times to select the desired character or symbol. • A to Z, 0 to 9, / and a space can be selected. • T ouch "AB⇔12" to toggle between the Alphabet input and Number input mode. • T ouch [CLR](D) to delete the selected character, symbol or number. • Touch " " to input a space. !8 Touch [](D) to move the cursor backwards, or touch [](D) to move the cursor forwards. !9 R epeat steps !7 and !8 to enter a call sign of up to 8 characters, including spaces. @0 After entering the call sign, touch [ENT](D). ✓✓ Information Be sure to add a repeater node (port) letter as the 8th digit in the call sign field after a repeater call sign, according to the repeater frequency band, as shown below. Note that Japanese repeater node letters are different. 1200 MHz:A (B in Japan) 430 MHz: B (A in Japan) 144 MHz: C (no D-STAR repeaters in Japan) Cross band operation between different nodes at the same repeater site can be made. Touch "CALL SIGN" Example: "JP1YYY A" Touch [ENT] Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) 9-32 ☞ Continued on the next page.