Icom IC-7100 Advanced Instructions - Page 191
Access repeater setting, Access repeater frequency programming, Touch USEFROM.
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Previous view 9 D-STAR OPERATION Repeater list programming (Continued) 7. Access repeater setting The programmed repeaters can be used as an access repeaters in the DR mode. For simplex operation, or when the programmed repeater is not used as an access repeater, select "NO." In this case, the programmed repeater does not appear in the "FROM" selection. @9 Touch "USE(FROM)." • The "USE(FROM)" screen appears. #0 Touch "YES." • Y ou can select the programmed repeater as an access repeater (FROM). 8. Access repeater frequency programming This item appears only when "YES" is selected in '7. Access repeater setting.' #1 Touch "FREQUENCY" to enter the frequency edit mode. • A cursor appears and blinks. #2 Touch the desired number to enter the desired frequency shift. • T ouch [CE](D) to delete the selected number. • T ouch [](D) to move the cursor backwards, or touch [](D) to move the cursor forwards. *If desired, touch the frequency for 1 second to open the Function set window, and then touch the "Frequency Clear" to delete the frequency. #3 After entering, touch [ENT](D). Touch "USE(FROM)" Touch "YES" Touch "FREQUENCY" Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) 9-34 Example: "439.340" Touch [ENT] ☞ Continued on the next page.