Icom IC-7100 Advanced Instructions - Page 22
Usb Universal Serial Bus Port, Never, External Speaker Jack [sp], Microphone Connector [mic] - mods
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Previous view 1 PANEL DESCRIPTION Main unit - Rear panel (Continued) !4 !3 !2 !2 USB (Universal Serial Bus) PORT [USB] Using a USB cable, connect a PC to do the follow- ing: - Input modulation - Remotely control the transceiver using CI-V com- mands (p. 20-2) - Send the received audio to the PC - S end the decoded characters to the PC - Low-speed data communication in the DV mode (p. 9-17) - Cloning using the optional CS-7100 cloning soft- ware (p. 21-5) - Remote control operation using the optional RS- BA1 ip remote control software (p. 21-5) • Two COM port numbers are assigned to the [USB] con- nector. One of them is "USB1," used for cloning and CI-V operation. The other one is "USB2," whose function is selected in "USB2 Function" item of the "Connectors" Set mode. (p. 17-25) SET > Connectors > USB2/DATA1 Function > USB2 Function About the USB driver: The USB driver and the installation guide can be downloaded from our website. ➥ http://www.icom.co.jp/world/index.html The following items are required: PC • Microsoft® Windows® XP, Microsoft® Windows Vista®, Microsoft® Windows® 7 or Microsoft® Windows® 8 OS • A USB 1.1 or 2.0 port Other items • USB cable (supplied with the transceiver) • PC software (such as the optional RS-BA1 or CS- 7100) NEVER connect the transceiver to a PC until the USB driver installation has been completed. About the modulation input: Select "USB" in the "Connectors" Set mode item "DATA OFF MOD" or "DATA MOD." The modulation input level from the USB jack can be set in the Set mode item "USB MOD Level." (p. 17-24) SET > Connectors > DATA OFF MOD SET > Connectors > DATA MOD SET > Connectors > USB MOD Level !3 E XTERNAL SPEAKER JACK [SP] Connect to an external speaker (4 to 8 ø). !4 MICROPHONE CONNECTOR [MIC] Plug in the supplied or an optional microphone. • See page 21-4 for appropriate microphones. • See page 1-20 for microphone connector information. • The optional OPC-589 cable can be used to connect an 8-pin microphone such as the SM-30 or SM-50. • A microphone connector is also available on the Controller. DO NOT simultaneously connect two microphones. 1-18