Icom IC-7100 Advanced Instructions - Page 229
GPS Auto transmission for only Simplex, Setting the GPS automatic transmission
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
Previous view 10 GPS/GPS-A OPERATION GPS Auto transmission for only Simplex In the DV mode, this function automatically transmits the GPS receiver's current position data, at a selected interval, and should only be used in Simplex transmission. NOTE: • Y our own call sign must be entered to activate the GPS automatic transmission. • W hen the "GPS Select" item on page 10-2 is set to "OFF" or "Manual," this function is disabled. GPS > GPS Set > GPS Select Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) DDSetting the GPS automatic transmission qqPush SET(C) to enter the Set mode. wwTouch the "GPS Auto TX" item of the "GPS" Set mode. GPS > GPS Auto TX • If the specified item is not displayed, touch [∫] or [√](D) one or more times to select the page. eeTouch to select the desired position transmit interval between OFF, 5*, 10, 30 seconds, or 1, 3, 5, 10, and 30 minutes. • If four GPS sentences are selected in GPS Sentence menu on page 10-16, "5sec" cannot be selected. • Selecting "OFF" cancels the GPS automatic transmission. • T he GPS message is also transmitted, if programmed. rrPush SET(C) to exit the Set mode. Touch "GPS." Touch "GPS Auto TX." NOTE: • Use GPS automatic transmission in only the sim- plex mode. • GPS automatic transmission through a repeater may interfere with other communications. W hen a GPS message is programmed, the trans- ceiver transmits it along with the position data. See page 10-17 for the GPS message programming. Touch the desired transmit interval. 10-22