Icom IC-7100 Advanced Instructions - Page 257
Delta F scan and Fine Delta F scan (VFO mode/Memory mode)., About the Delta F scan, About
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 257 highlights
Previous view 12 SCAN OPERATION ∂F scan and Fine ∂F scan (VFO mode/Memory mode) DDAbout the ∂F scan ∂F (Delta Frequency) scan searches for signals within the specified range with the displayed VFO frequency or Memory channel frequency as the center frequency. The frequency range is specified by the width of the selected span. qqTouch the Memory channel number indication once or twice to select the VFO mode or Memory mode. (p. 12-4) wwPush MENU (C) one or more times to select the "M1" (Menu 1) screen. eeTouch [SCAN](D) to display the "SCAN" screen. rrTouch [SPAN](D) one or more times to select the desired ∂F span width. • ±5 kHz, ±10 kHz, ±20 kHz, ±50 kHz, ±100 kHz, ±500 kHz and ±1 MHz are selectable. ttSet the center frequency of the ∂F scan. • In the VFO mode, rotate the Dial to set the center frequency. • In the memory mode, rotate [M-CH] (L) to select the desired Memory channel whose frequency will be the center frequency. yyTouch [∂F](D) to start the ∂F scan. • "∂F SCAN," the MHz and kHz decimal points blink while scanning. • If "Up/Down" is selected as the "MAIN DIAL (SCAN)" option in the Scan Set mode, rotating the Dial changes the scanning direction. (p. 3-4) uuWhen the scan detects a signal, the scan stops, pauses or ignores it, depending on the Scan Resume function, VSC function or the squelch status. iiTouch [∂F](D) again to cancel the ∂F scan. Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) Touch [SCAN] Touch [SPAN] one or more times to select the ∂F span width. Rotate the Dial (VFO mode) Rotate the [M-CH] (Memory mode) Set the center frequency While ∂F scanning (VFO mode) 12-14