Icom IC-7100 Advanced Instructions - Page 267
Saving the setting data onto an SD card
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 267 highlights
Previous view 13 USING AN SD CARD Saving the setting data onto an SD card Memory channels, Set mode item settings, and repeater lists can be saved on the SD card. Saving data settings on the SD card allows you to easily restore the transceiver to its previous settings, even if an All reset is performed. Left Display ✓✓ For your information Data settings are saved in the "icf" file format that is used in the CS-7100 cloning software. The saved data on the SD card can be copied onto a PC and edited by the cloning software. Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) Data settings can be saved as a new file or to overwrite an older file. Saved as a new file qqPush SET(C) to enter the Set mode. wwTouch the "Save Setting" item of the "SD Card" Set mode. (SD Card > Save Setting) • If the specified item is not displayed, touch [∫] or [√](D) one or more times to select the page. eeTouch "." • The "FILE NAME" screen appears. • T he file name is automatically named in the following manner; Setyyyymmdd_xx (yyyy: Year, mm: month, dd: day, xx: serial number) Example: If a second file is saved on March 1, 2013, the file is named "Set20130301_02." • If you want to change the file name, see "Save with a dif- ferent file name" (p. 13-7). rrTouch [ENT](D) to save the file name. • T he confirmation screen "Save file?" appears. ttTouch [YES](D) to save. • W hile saving, a progress bar is displayed, then the "SD CARD" screen is displayed after the save is completed. yyPush SET(C) to exit the Set mode. q q ˔w Overwriting a file (Example: Overwriting the "Set20130301_01") ➥➥Select the desired file to be overwritten in step e as described above. (Example: Selecting "Set20130301_01") 13-6