Icom IC-7100 Advanced Instructions - Page 269
Loading the saved data files that are on the SD card, Example, Load Setting
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
Previous view 13 USING AN SD CARD Loading the saved data files that are on the SD card The saved memory channels, Set mode item settings and repeater lists can be copied to the transceiver. This function is convenient when copying the saved data, such as memory channels, or repeater lists, to another IC-7100 and then operating with the same data. Saving the current data is recommended before loading other data in the transceiver. (Example: L oading all the data in the "Set20130301_01" file) qqPush SET(C) to enter the Set mode. wwTouch the "Load Setting" item of the "SD Card" Set mode. (SD Card > Load Setting) • If the specified item is not displayed, touch [∫] or [√](D) one or more times to select the page. eeTouch the desired file to be loaded. (Example: Selecting "Set20130301_01") • The LOAD FILE screen appears. rrTouch the desired loading option, as shown below. • ALL: Loads all memory channels, item settings in the menu list and the repeater list into the transceiver. • Select: Loads all memory channels, Set mode item settings and the repeater list into the transceiver. "MY call signs" and "REF Adjust" settings can be selected to be loaded. • Repeater List Only: Loads only the repeater list into the transceiver. ttThe "Keep 'SKIP' settings in Repeater List?" appears. Touch [YES], [NO] or [Cancel](D). • W hen [YES](D) is touched, the skip settings of the repeater list are retained. (p. 9-34) • W hen [NO](D) is touched, the skip settings of the repeater list are not retained. (p. 9-34) • W hen [Cancel](D) is touched, returns to the LOAD FILE screen. • W hen [YES] or [NO](D) is touched, "Load file?" appears. To update the repeater list, click here! Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) In the "SD Card" screen, touch "Load Setting." ☞☞Continued on the next page 13-8