Icom IC-7100 Advanced Instructions - Page 309

Previous view 17 SET MODE Set mode description The Set mode is used to program infrequently changed values or function settings. NOTE: The Set mode is constructed in a tree structure. You may go to the next tree level, or go back a level, depending on the selected item. Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) DDThe Set mode settings qqPush SET(C) to enter the Set mode. wwIf the specified item is not displayed, touch [∫] or [√] (D) one or more times to select the page. • If [∫](D) or [√](D) is continuously held down, the pages are quickly scrolled. • Rotating the Dial also selects the pages. eeTouch a desired item to go to the next level. rrRepeat steps w and e to show the desired item's setting screen. • T o go back the previous tree level, touch [](D), or MENU (C). ttTouch a desired option shown on the display, or [+]/ [-](D) to adjust a level. • W hen you touch an option, it is automatically saved and the screen returns to the previous display. • R otating the Dial also adjusts the level. • P ush QUICK (C), and then touch "Default" to reset to the default setting, if desired. • T o set other item, touch [](D), or MENU (C) to go back a tree level. yyPush SET(C) to exit the Set mode. Example: Change the "Memopad Numbers" item option to "10." SET 17-2