Icom IC-7100 Advanced Instructions - Page 310

Previous view 17 SET MODE Set mode items and Default settings ➥➥Call sign (Section 9) ➥➥RX History (Section 9) ➥➥MY Station (Section 7) ➥➥GPS (Section 10) ➥➥SD Card (Section 13) NOTE: The default settings shown below in bold are for the USA version. The default settings may differ, depending on your transceiver version. Voice Memo In this item, set the TX/RX voice recording options. QSO Recorder * Starts recording the TX/RX audio. Play Files* Selects to playback or delete the recorded audio. Recorder Set REC Mode TX&RX or RX Only Selects to record the TX audio or not. RX REC Condition Always or Squelch Auto Selects whether or not the squelch status affects the RX voice audio recording. File Split OFF or ON Selects whether or not to automatically create a new file after each transmission, reception, or each time the squelch opens or closes. Even if the squelch is closed, a new file is created when the "RX REC Condition" item is set to "Squelch Auto." PTT Auto REC OFF or ON Turns the PTT Automatic Recording function ON or OFF. Player Set Skip Time 3sec, 5sec, 10sec or 30sec Sets the Skip time to rewind or forward the re- corded audio when you push the fast-rewind or fast-forward key during playback. DV Auto Reply* Records a voice audio to use for the Auto Reply function in the DV mode. * Be sure to insert the SD card into the transceiver before selecting these items. DV Set In this item, set infrequently changed values or functions in the DV mode. Standby Beep OFF, ON or ON (to me: High Tone) Selects whether or not to sound a beep after a received signal disappears. Auto Reply OFF, ON or Voice Selects whether or not to automatically reply to a call addressed to your own call sign. DV Data TX PTT or Auto Selects to manually or automatically transmit low speed data. Digital Monitor Auto, Digital or Analog Selects the DV mode RX monitoring when [XFC] is held down. Digital Repeater Set OFF or ON Turns the digital repeater setting function ON or OFF. This function is usable in any DV mode ex- cept the DR mode. RX Call Sign Write OFF or Auto Turns the RX call sign automatic write function ON or OFF. This function is usable in any DV mode except the DR mode. RX Repeater Write OFF or Auto Turns the repeater call sign automatic write func- tion ON or OFF. This function is usable in any DV mode except the DR mode. DV Auto Detect OFF or ON Turns the DV mode automatic detect function ON or OFF. RX Record (RPT) ALL or Latest Only Selects whether to record all calls or only the lat- est call, when the received signal includes a sta- tus message ("UR?" or "RPT?") that is sent back from the access repeater. BK OFF or ON Turns the BK (Break-in) function ON or OFF. The BK function allows you to break into a con- versation between two stations with call sign squelch enabled. EMR OFF or ON Turns the EMR (Enhanced Monitor Request) communication mode ON or OFF. EMR AF Level 0%~50%~100% Sets the audio output level when an EMR mode signal is received. 17-3