Icom IC-7100 Advanced Instructions - Page 320

Previous view 17 SET MODE DV Set mode Standby Beep (Default: ON) DV Set > Standby Beep (Standby Beep) Turn the standby beep function ON or OFF. This function sounds a beep after a received signal disappears. • OFF: Turns the function OFF. • ON: Turns the function ON to sound a beep. • ON (to me: High Tone): T urns the function ON to sound a beep. If the signal is addressed to your call sign, a high pitch beep sounds. NOTE: • Even if "Beep (Confirmation)" of the Function screen is OFF, the standby beep sounds. • T he standby beep output level can be set in "Beep Level" of the Function screen. Auto Reply (Default: OFF) DV Set > Auto Reply (Auto Reply) Set the automatic reply function to ON, OFF or Voice. This function automatically replies to a call addressed to your own call sign, even if you are away from the transceiver. When "ON" or "Voice" is selected, the automatic reply function is automatically turned OFF when you push [PTT]. • OFF: The automatic reply function is OFF. • ON: Replies with your own call sign. (No audio reply is sent) • Voice: Replies with your call sign and any Auto Reply message recorded on the SD (up to 10 seconds). If no SD card is inserted or no message is recorded, only your call sign is transmitted. The transmitted audio will be heard from the speaker. DV Data TX (Default: Auto) DV Set > DV Data TX (DV Data TX) Select whether to manually or automatically transmit slow-speed data. • PTT: Push [PTT] to manually transmit the input data. • Auto: When data is input from a PC through either the [USB2] port or [DATA1] jack*, the transceiver automatically transmits it. *"USB2 Function" or "DATA1 Function" item must be set to "DV Data." (p. 17-25) Digital Monitor (Default: Auto) DV Set > Digital Monitor (Digital Monitor) Select the receive mode when [XFC] is held down in the DV mode. • Auto: Receives in the DV mode or the FM mode, depending on the received signal. • Digital: Monitors in the DV mode. • Analog: Monitors in the FM mode. Digital Repeater Set (Default: ON) DV Set > Digital Repeater Set (Digital Repeater Set) Turn the digital repeater setting function ON or OFF. In any DV mode except for the DR mode, and when accessing a repeater that has a call sign that is different than the transceiver's setting, this function reads the repeater's transmit signal and automatically sets the repeater call sign. • OFF: Turns the function OFF. • ON: Automatically sets the repeater call sign. RX Call Sign Write (Default: OFF) DV Set > RX Call Sign Write (RX Call Sign Write) Set the RX call sign automatic write function to Auto or OFF. When receiving a call addressed to your own call sign in any DV mode except for the DR mode, this function automatically sets the caller station call sign into "UR." • OFF: Turns the function OFF. • Auto: Automatically sets the call sign of the caller sta- tion into "UR." RX Repeater Write (Default: OFF) DV Set > RX Repeater Write (RX Repeater Write) Set the repeater call sign automatic write function to Auto or OFF. When receiving a call addressed to your own call sign through a repeater in any DV mode except for the DR mode, this function automatically sets the call sign of the repeater into "R1" or "R2." • OFF: Turns the function OFF. • Auto: Automatically sets the call sign of the repeater into "R1" and/or "R2." 17-13