Icom IC-7100 Advanced Instructions - Page 327

Previous view 17 SET MODE Function Set mode (Continued) Auto Repeater Function > SPLIT/DUP > Auto Repeater (Auto Repeater) This item appears only in the Korean and U.S.A. version transceivers. The auto repeater function automatically turns the duplex operation and tone encoder* ON or OFF. The offset and repeater tone* are not changed by the auto repeater function. Reset these setting values, if necessary. For Korean versions • OFF: Turns the function OFF. • ON: Turns ON the duplex operation and tone encod- er*. (Default) For U.S.A. version • OFF: Turns the function OFF. • ON (DUP): Turns ON the duplex operation only. (Default) • ON (DUP, TONE): Turns ON the duplex operation and tone encoder*. *The tone encoder will not be turned ON in the DV mode. Auto Start (Default: OFF) Function > Tuner > Auto Start (Tuner (Auto Start)) Turn the Automatic Antenna Tuner function ON or OFF for an external antenna tuner (like the optional AT-180). This function is for only the HF bands. • OFF: Tuning starts only when TUNER/CALL is pushed. • ON: The external antenna tuner automatically starts tuning when the SWR is high, even if the tuner is turned OFF. PTT Start (Default: OFF) Function > Tuner > PTT Start (Tuner (PTT Start)) When [PTT] is pushed after the operating frequency is changed more than 1% from the last tuned frequency, the external antenna tuner (optional AH-4 or AT-180) automatically starts tuning. • OFF: Tuning starts only when TUNER/CALL is pushed. • ON : (AH-4) Automatically starts tuning when [PTT] is pushed on a new frequency, whether the external antenna tuner is ON or OFF (AT-180) Automatically starts tuning when [PTT] is pushed on a new frequency, only if the internal antenna tuner is ON [TUNER] Switch (Default: Auto) Function > Tuner > [TUNER] Switch ([TUNER] Switch) Select whether or not to store the AT-180's status on each band. When you change the operating frequency, this function will automatically select the correct AT-180's status, or you must do it manually. • Manual: You must manually change the AT-180's sta- tus by pushing [TUNER]. • Auto: The AT-180's status memorized by the band memory is automatically selected. You can also manually change it by pushing [TUNER]. [SPEECH/LOCK] Switch (Default: SPEECH/LOCK) Function > [SPEECH/LOCK] Switch ([SPEECH/LOCK] Switch) Select the SPEECH switch action. • SPEECH/LOCK: Pushing SPEECH turns ON the voice synthesizer function. Holding down SPEECH turns the dial lock function ON or OFF. • LOCK/SPEECH: Pushing SPEECH turns the dial lock function ON or OFF. Holding down SPEECH turns ON the voice synthesizer function. Lock Function (Default: MAIN DIAL) Function > Lock Function (Lock Function) The dial lock function prevents frequency changes by accidental movement of the tuning dial. The lock function electronically locks the dial. • MAIN DIAL: When Lock Function is activated, the Dial is disabled. • PANEL: When Lock Function is activated, the panel is disabled. Functions except for [AF], [RF/SQL], [PWR], [SPEECH/LOCK] are inhibited. Memopad Numbers (Default: 5) Function > Memopad Numbers (Memopad Numbers) Set the number of usable memopad channels to either 5 or 10. See page 11-13 for details. 17-20