Icom IC-7100 Advanced Instructions - Page 33
Installing the Controller, Attach the bracket to the Controller.
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Previous view 2 INSTALLATION AND CONNECTIONS Installing the Controller The controller can be installed on the dashboard of a vehicle or console by using the optional Controller bracket. • Controller installtion procedures 1. Place the controller bracket on a dashboard or console. Place the MBF-1 holder. Refer to the MBF-1 installation manual. MBF-1 (Optional) Suction cup Brace knob 2. Attach the bracket to the Controller. Tighten the screws to attach the bracket to the Controller. (The screws are supplied with the MBA-1) Screws MBA-1 (Optional) Controller MBF-1 Bracket hook MBA-1 Nut Adjust knob rrInsert the MBA-1guide to MBF-1 bracket hook. ttTighten the nut. yyAdjust the angle, then tighten the adjust knob. 4. Cushion If the Controller vibrates and hits to the dashboard or console when driving, use the cushion supplied with the Controller bracket. When the Controller is fixed, tighten the adjustment knob while pressing it to the stuck cushion. The MBF-1 includes 2 sheets of cushions for each different thickness. 3. Connect the Controller to the bracket There are 2 ways to mount the controller. Select the best way for your environment. MBF-1bracket hook MBA-1 Nut Adjust knob qqInsert the MBA-1guide to the MBF-1 bracket hook. wwTighten the nut. eeAdjust the tilt with the adjust knob. 2-5 Cushions