Icom IC-7100 Advanced Instructions - Page 346

Previous view 19 MAINTENANCE Resetting the CPU If you want to reset the operating parameters to their default values (VFO frequency, VFO settings, menu group's contents) without clearing certain data, a partial reset can be performed as described below. DDPartial reset qqPush SET(C) to enter the Set mode. wwTouch the "Reset" item of the "Others" Set mode. (Others > Reset) • If the specified item is not displayed, touch [∫] or [√](D) one or more times to select the page. eeTouch "Partial Reset." Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) rrWhen the dialogue appears, touch "YES." ttThe transceiver displays "PARTIAL RESET," then the partial reset is completed. After performing the partial reset A Partial reset resets operating settings to their default values (VFO frequency, VFO settings, menu contents) without clearing the items listed below: • Memory channel contents (Section 4) • Repeater list (p. 9-28) • Call sign memories (p. 9-45) • TX Message data (p. 9-2) • GPS Memory contents (p. 10-7) • GPS Message data (p. 10-17) • Programmed user band edge frequencies (p. 3-14) • Memory keyer contents (p. 4-6) • DTMF memories (p. 6-17) • RTTY memories (p. 4-18) • REF Adj (Reference frequency) setting (p. 17-22) 19-3