Icom IC-7100 Advanced Instructions - Page 349
Cloning using a cloning software, Save Setting, Load Setting
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 349 highlights
Previous view 19 MAINTENANCE Data cloning (Continued) DDCloning using a cloning software The optional CS-7100 cloning software is also available to clone/edit contents with a PC using ICF format files. The programmed data can be write to the transceiver using an SD card or a PC. This section describes how to write the programmed data to the transceiver using an SD card. If you want to write the programmed data into the transceiver using a PC, see the CS-7100 instruction manual for details. qqSave the IC-7100's setting data onto an SD card. (p. 13-6) (SET(C) > SD Card > Save Setting) wwStart-up the Windows that the CS-7100 is installed. eeInsert the SD card in the PC. • Insert the SD card into the SD card slot of the PC or the SD card reader. rrDouble-click the CS-7100 shortcut icon on the desktop to start the software. • After starting up, "Initial Setup" appears the first time. • T o make the initial setup using the saved data on the card, follow the steps as described in "Initial setup using an SD card." (p. 19-7) ttClick " " on the tool bar, or "Open..." in the File menu to show the data file selection screen. Select the ICF file, saved in step q, as described above. yySet the desired settings in the CS-7100. • Please refer to the Help file of the cloning software for assistance with the functions or settings. uuClick " " on the tool bar, or "Save As..." in the File menu to save the settings in an "icf" file format in a [Setting] folder on the card. iiInsert the SD card that includes the ICF file into the slot of the transceiver. ooLoad the file to complete the cloning. (SET(C) > SD Card > Load Setting) Open Save Click 19-6