Icom IC-7100 Advanced Instructions - Page 362
Sub cmd., Description, Send/read the RF/SQL Control
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 362 highlights
Previous view 20 CONTROL COMMAND Remote jack (CI-V) information DDCommand table (Continued) Cmd. Sub cmd. 19 00 1A 00 01 02 03 04 05 0001 0002 0003 0004 0005 0006 0007 0008 0009 0010 0011 0012 0013 0014 Data Description Read the transceiver ID see p. 20-16 Send/read the Memory channel contents see p. 20-12 Send/read the Band stacking regis- ter contents see p. 20-13 Send/read the Memory keyer contents* 00 to 49 Send/read the selected filter width (AM: 00=200 Hz to 49=10 kHz; other than AM modes: 00=50 Hz to 40/31=3600 Hz/2700 Hz) 00 to 13 Send/read the selected AGC time constant (00=OFF, AM: 01=0.3 sec. to 13=8.0 sec., SSB/CW/RTTY: 01=0.1 sec. to 13=6.0 sec.) 00/01 Send/read the TX Monitor function setting (00=OFF, 01=ON) 0000 to Send/read the TX Monitor level 0255 (0000=0% to 0255=100%) Send/read the Beep level (0000=0% to 0255=100%) 00/01 Send/read the Beep level limit setting (00=OFF, 01=ON) 00/01 Send/read the Confirmation beep setting (00=OFF, 01=ON) 00 to 03 Send/read the Band edge beep setting (00=OFF, 01=ON(Default), 02=ON(User), 03=ON(User & TX Limit)) 00 to 02 Send/read the RF/SQL Control setting (00=Auto, 01=SQL, 02=RF+SQL) 00 to 05 Send/read the TX Delay setting (HF) (00=OFF, 01=10ms, 02=15ms, 03=20ms, 04=25ms, 05=30ms) 00 to 05 Send/read the TX Delay setting (50M) (00=OFF, 01=10ms, 02=15ms, 03=20ms, 04=25ms, 05=30ms) 00 to 05 Send/read the TX Delay setting (70M) (00=OFF, 01=10ms, 02=15ms, 03=20ms, 04=25ms, 05=30ms) 00 to 05 Send/read the TX Delay setting (144M) (00=OFF, 01=10ms, 02=15ms, 03=20ms, 04=25ms, 05=30ms) 00 to 05 Send/read the TX Delay setting (430M) (00=OFF, 01=10ms, 02=15ms, 03=20ms, 04=25ms, 05=30ms) 00 to 05 Send/read the Time-Out Timer setting (0=OFF, 1=3 min., 2=5 min., 3=10 min., 4=20 min., 5=30 min.) 00/01 Send/read the PTT Lock function setting (00=OFF, 01=ON) Cmd. Sub cmd. Data Description 1A 05 0015 00/01 Send/read the Quick Split function setting (00=OFF, 01=ON) 0016 see p. 20-13 Send/read the Split offset frequency 0017 0018 0019 0020 0021 0022 0023 0024 0025 0026 0027 0028 0029 0030 0031 0032 0033 0034 00/01 Send/read the Split Lock function setting (00=OFF, 01=ON) see p. 20-13 Send/read the Duplex offset fre- quency 00/01 Send/read the One Touch Repeater setting (00=DUP-, 01=DUP+) 00 to 02 Send/read the Auto Repeater set- ting (0=OFF, 1=ON(DUP) (for USA version) or ON (for Korea ver- sion), 2=ON(DUP,TONE)(for USA version) 00/01 Send/read the Tuner Auto Start setting (00=OFF, 01=ON) 00/01 Send/read the PTT Tune setting (00=OFF, 01=ON) 00 Send/read the Manual selection for the [TUNER] Switch function. 01 Send/read the Auto selection for the [TUNER] Switch function. 00/01 Send/read [SPEECH/LOCK] key function setting (00=Push: SPEECH, Hold down: LOCK), 01=Push: LOCK, Hold down: SPEECH) 00/01 Send/read the Lock function setting (00=MAIN DIAL, 01=PANEL) 00/01 Send/read the number of memo pad channels (00=5CH, 01=10CH) 00 to 02 Send/read the Auto TS setting for the Dial (00=OFF, 01=LOW, 02=HIGH) 00/01 Send/read the microphone Up/ Down speed setting (00=Slow, 01=Fast) 00 to 02 Send/read the Notch function set- ting for SSB mode (00=Auto, 01=Manual, 02=Auto/Manual) 00 to 02 Send/read the Notch function set- ting for AM mode (00=Auto, 01=Manual, 02=Auto/Manual) 00/01 Send/read the SSB/CW Synchro- nous Tuning function setting (00=OFF, 01=ON) 00/01 Send/read the CW normal side setting (00=LSB, 01=USB) 00/01 Send/read the voice 1st menu (00=VOICE-Root, 01=VOICE-TX) 00/01 Send/read the keyer 1st menu (00=KEYER-Root, 01=KEYER-SEND) * The counter can be inserted into only one channel. Before inserting the counter, be sure to clear the counter on another channel. 20-5