Icom IC-7100 Advanced Instructions - Page 371
DV MY call sign setting
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 371 highlights
Previous view 20 CONTROL COMMAND Remote jack (CI-V) information DDData content description (Continued) • GPS-A Symbol setting Command : 1A 05 0206, 0207, 0208, 0209 XX XX Second digit First digit ⁄, \, 0 to 9, A to Z can be used for the first digit character. See 'Character code setting' for the second digit character. (p. 20-12) • Comment setting Command: 1A 05 0211 Set a comment of up to 43 characters. See 'Character code setting.' (p. 20-12) • GPS message setting Command: 1A 05 0200 Set a GPS message of up to 20 characters. See 'Character code setting.' (p. 20-12) • Data mode with filter width setting Command: 1A 06 qw 9999 00: Data mode OFF 01: FIL1 02: FIL2 03: FIL3 00: Data mode OFF 01: Data mode ON • Repeater tone/tone squelch frequency setting Command: 1B 00, 1B 01 q* w e 0 0 X X X X 0 (fixed) 0 (fixed) 100 Hz digit 10 Hz digit 1 Hz digit 0.1 Hz digit *Not necessary when setting a frequency. • DTCS code and polarity setting Command: 1B 02 q w e XX0XXX Transmit polarity: 0: Normal 1: Reverse Receive polarity: 0: Normal 1: Reverse 0 (fixed) First digit: 0-7 Second digit: 0-7 Third digit: 0-7 • Digital code squelch setting Command: 1B 07 q XX Second digit: 0-9 First digit: 0-9 • DV MY call sign setting Command: 1F 00 Set your own call sign and note of up to 12 characters. q-i o-!2 9 9 ʜʜ 9 9 9 9 9 9 9 9 9 9 q-i Your own call sign setting o-!2 Note setting • DV TX call signs setting Command: 1F 01 Set "UR," "R1" and "R2" call signs of 8 characters (fixed). q-i o-!6 !7-@4 9 9 ʜʜ 9 9 9 9 ʜʜ 9 9 9 9 ʜʜ 9 9 q-i UR (Destination) call sign setting o-!6 R1 (Access repeater) call sign setting !7-@4 R2 (Gateway/Link repeater) call sign setting • Character's code of the call sign Character ASCII code Character ASCII code 0-9 30-39 A-Z 41-5A Space 20 ⁄ 2F • DV TX message setting Command: 1F 02 Set the transmit message of up to 20 characters. See 'Character code setting.' (p. 20-12) "FF" stops sending or reading messages. 20-14