Icom IC-7100 Advanced Instructions - Page 375
Specifications, General, Transmitter
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 375 highlights
Previous view 21 SPECIFICATIONS AND OPTIONS Specifications DDGeneral • Frequency coverage: Receive 0.030000 -199.999999*1*2 400.000000 -470.000000*1*2 (unit: MHz) Transmit 1.800000 - 1.999999*2, 3.500000 - 3.999999*2, 5.255000 - 5.405000*1*3, 5.332000*3*4, 5.348000*3*4, 5.358500*3*4, 5.373000*3*4, 5.405000*3*4, 7.000000 - 7.300000*2, 10.100000 - 10.150000*2, 14.000000 - 14.350000*2, 18.068000 - 18.168000*2, 21.000000 - 21.450000*2, 24.890000 - 24.990000*2, 28.000000 - 29.700000*2, 50.000000 - 54.000000*2, 70.000000 - 70.500000*2, 144.000000 - 148.000000*2, 430.000000 -450.000000*2 *1Some frequency ranges are not guaranteed. *2Depending on version. *3USA version only. *4Center frequency. • Mode: USB, LSB, CW, RTTY, AM, FM, WFM (RX only), DV • No. of memory channels: 495CH (99CH × 5 bank) • No. of scan edge memory channels: 6 CH (2 × 3 edges) • No. of call channels: 4 CH (2 × 2 band) • Antenna connector: SO-239 × 2 • Antenna impedance: 50 ø • Usable temperature range: -10˚C to +60˚C; +14˚F to +140˚F • Frequency stability: Less than ±0.5 ppm, 5 minutes after power ON. (0˚C to +50˚C; +32˚F to +122˚F at 430 MHz band) • Frequency resolution: 1 Hz • Power supply: 13.8 V DC ±15% (negative ground) • Power consumption: Transmit Max. power: 22.0 A Receive Standby: 0.9 A Max. audio: 1.2 A • Dimensions (projections not included): Main unit: 167(W) × 58(H) × 225(D) mm; 6.6(W) × 2.3(H) × 8.9(D) in Controller: 165(W) × 64(H) × 78.5(D) mm; 6.5(W) × 2.5(H) × 3.1(D) in • Weight (approximately): Main unit: 2.3 kg; 5.1 lb Controller: 0.5 kg; 1.1 lb • ACC connector: 13-pin • DATA1 connector: 3-conductor 2.5 (d) mm (1⁄10″) • DATA2 connector: 6-pin • REMOTE connector: 2-conductor 3.5 (d) mm (1⁄8″) DDTransmitter • Output power (at 13.8 V DC/+25˚C): (continuously adjustable) Frequency band HF/50 MHz 70 MHz 144 MHz 430 MHz Output power 2 to 100 W (AM: 1 to 30 W)* 2 to 50 W (AM: 1 to 15 W)* 2 to 50 W 2 to 35 W * In the AM mode, transmission can be performed only on the HF/50/70 MHz frequency band. • Modulation system: SSB: Digital PSN modulation AM: Digital Low power modulation FM: Digital Phase modulation DV: GMSK Digital Phase modulation • Spurious emission: (Spurious domain) HF bands: Less than -50 dB 50 MHz band: Less than -63 dB 70/144/430 MHz bands: Less than -60 dB (Out-of-band domain) HF bands: Less than -40 dB 50/70/144/430 MHz bands: Less than -60 dB • Carrier suppression: More than 50 dB • Unwanted sideband suppression: More than 50 dB • Microphone connector: 8-pin modular jack • Microphone impedance: 600 ø • ELEC-KEY connector: 3-conductor 3.5(d) mm (1⁄8″) • KEY connector: 2-conductor 3.5(d) mm (1⁄8″) 21-2