Icom IC-7100 Advanced Instructions - Page 74
Contest number Set mode, Default: Normal, Default: M2
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Previous view 4 RECEIVE AND TRANSMIT Electronic keyer functions (Continued) DDContest number Set mode This mode is used to set the contest number, count up trigger and Present number. • Setting contents q In the CW mode, push MENU (C) one or more times to select the "M-2" screen (M-2 menu). w P ush [KEYER](D) to display the "KEYER SEND" screen. • If the "KEYER" (Root) screen is displayed, skip step e. eePush MENU (C) to display the "KEYER" screen. rrPush [001](D) to enter the "KEYER 001" (Contest Number Set) screen. ttTouch the desired item to select. yyTouch the desired option or rotate the Dial to change the setting. • If desired, touch the item for 1 second to open the Default set window, then select "Default" to reset to the default setting. uuPush MENU (C) to return to the "KEYER" (Root) screen. The L, R, C or D in the instructions indicate the part of the controller. L: Left side, R: Right side, C: Center bottom D: Display (Touch screen) • Contest number Set mode "KEYER" (Root) screen Touch [001] Touch the item (Example: Number Style) Number Style (Default: Normal) This item sets the numbering system used for contest numbers- normal or short morse numbers. Short morse numbers are also referred to as "cut" numbers. • Normal: • 190➔ANO: • 190➔ANT: • 90➔NO: • 90➔NT: Does not use short morse numbers Sets 1 as A, 9 as N and 0 as O. Sets 1 as A, 9 as N and 0 as T. Sets 9 as N and 0 as O. Sets 9 as N and 0 as T. Count Up Trigger (Default: M2) Set the count-up trigger to one of four memory slots for the contest number exchange. The count-up trigger allows the contest number to automatically advance after each complete number exchange is sent. • M1, M2, M3 or M4 can be set. • To the default setting Present Number (Default: 001) This item shows the current number for the count-up trigger channel set above. • Touch [+] or [-](D) or rotate the Dial to change the number. • Hold down the item for 1 second to display the default set window, then touch "Default" to set the counter to "001." 4-9 • Default set window Touch the option (Example: 190➔ANO) Touch the item for 1 second. Touch "Default."