Icom IC-7100 Advanced Instructions - Page 8
Key Speed/cw Pitch Adjustment Key, Mic Gain/rf Power Adjustment Key - antenna tuner
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Previous view 1 PANEL DESCRIPTION Controller - Front panel (Continued) PWR AF RF/SQL i7100 TX / RX CLR M-CH BANK PBT RIT RIT TUNER/CALL MENU NB NR MIC/RF PWR SPEED/PITCH P.AMP ATT NOTCH DR SET QUICK AUTO TUNE RX�CS SPEECH XFC MPAD o !0 !1 !2 !3 !4 o ANTENNA TUNER/CALL KEY TUNER/CALL ❍ ANTENNA TUNER KEY Operation (p. 16-4) (Frequency band: HF/50 MHz) ➥ Push to turn an optional automatic antenna tuner ON or OFF (bypass). ➥ Hold down for 1 second to manually tune the antenna tuner. • If the tuner cannot tune the antenna within 20 sec- onds, the tuning circuit is automatically bypassed. ❍ CALL KEY Operation (p. 11-4) (Frequency band: 144/430 MHz) Push to select the Call channel. In the 70 MHz band, push to sound an error beep. !0 MENU KEY MENU (p. 1-11) Push to change the set of functions assigned to the touch keys. • Toggles the function display menu between M-1, M-2 and M-3 menus or D-1 and D-2 menus. !1 M IC GAIN/RF POWER ADJUSTMENT KEY MIC/RF PWR (p. 3-24) Push to open the MIC gain/RF power adjustment display. !2 NOISE BLANKER KEY NB (p. 5-8) (Mode: SSB/CW/RTTY/AM) ➥➥Push to turn the noise blanker ON or OFF. The noise blanker reduces pulse-type noise such as that generated by vehicle ignition systems. The noise blanker is not effective for non-pulse-type noise. • "NB" appears when the noise blanker is ON. ➥➥Hold down for 1 second to display the "NB" screen. Push to return to the previous screen. !3 K EY SPEED/CW PITCH ADJUSTMENT KEY SPEED/PITCH (pp. 4-4, 6-4) Push to open the Key speed/CW pitch adjustment display. • Rotate [M-CH] to adjust the keying speed of the internal electronic CW keyer to between 6 wpm (minimum) and 48 wpm (maximum). • Rotate [BANK] to shift the received CW audio pitch and the CW sidetone pitch without changing the operating frequency. • The CW pitch can be adjusted from 300 to 900 Hz in approximately 5 Hz steps. • Push again to close the window. • Rotate [M-CH] to adjust the MIC gain. • R otate [BANK] to adjust the RF power. Frequency band HF/50 MHz 70 MHz* 144 MHz 430 MHz RF output power range 2 to 100 W (AM: 1 to 30 W) 2 to 50 W (AM: 1 to 15 W) 2 to 50 W 2 to 35 W • Push again to close the window. !4 N OISE REDUCTION KEY NR (p. 5-9) ➥➥Push to turn DSP noise reduction ON or OFF. • "NR" appears when noise reduction is ON. ➥➥Hold down for 1 second to display the "NR" screen. Push to return to the previous screen. • Rotate the Dial to adjust the DSP noise reduction level. Set for maximum readability. * 70 MHz band transmission is available, depending on the transceiver version. 1-4