Icom IC-7100 Advanced Instructions - Page 90
Repeater operation, Frequency Offset setting, Frequency offset - split tone operation
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Previous view 4 RECEIVE AND TRANSMIT Repeater operation A repeater receives transmitted signals and retransmits them on a different frequency. When using a repeater, the transmit frequency is shifted from the receive frequency by a frequency offset. A repeater can be accessed using the duplex function by setting the frequency shift to the same value as the repeater's frequency offset. See Section 7, Section 8 and Section 9 for details on accessing a D-STAR® repeater. qqTouch the Memory channel indication once or twice to select the VFO mode. wwSelect the desired frequency band. (p. 3-6) eeOn the Mode selection screen, touch "FM" to select the FM mode. rrRotate the Dial to set the receive frequency (Repeat- er output frequency). When the Auto Repeater function is turned ON (available in only the U.S.A. and Korea versions), steps t and y are not necessary. (p. 4-29) ttPush MENU (C) one or more times to display the "M-2" screen (M-2 menu), then touch [DUP](D) one or more times to set the offset direction. • "DUP-" or "DUP+" appears. • The transmit frequency (repeater input frequency) appears above the function menu. • The frequency offset (amount of shift) can be set in the "DUP Offset" item of the Function Set. (p. 17-19) yyTouch [TONE](D) to turn ON the repeater tone. • "TONE" appears. • The tone frequency can be set in the "TONE" screen. 88.5 Hz is set by default. (p. 4-26) uuCommunicate in the normal way. • Subaudible tones are superimposed on your transmit signal. Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) Repeater tone icon Duplex icon Transmit frequency (Repeater input frequency) Frequency Offset setting The frequency offset (amount of shift) can be set in the "DUP Offset" item of the Function Set. (p. 17-19) SET(C) > Function > SPLIT/DUP > DUP Offset Frequency offset 5.0000 MHz If the Repeater tone frequency or the frequency offset is changed, the tone frequency or frequency offset for auto repeater function is also changed. 4-25