Icom IC-7100 Advanced Instructions - Page 91
Repeater access tone frequency setting
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Previous view 4 RECEIVE AND TRANSMIT Repeater operation (Continued) DDRepeater access tone frequency setting Some repeaters require a subaudible tone to be accessed. Subaudible tones are superimposed on your normal signal and must be set first. You can select 50 tones from 67.0 Hz to 254.1 Hz. qqIn the FM mode, push MENU (C) one or more times to select the "M-2" screen (M-2 menu). wwTouch [TONE](D) one or more times to turn ON the Tone encoder function. • "TONE" appears. • Touch [TONE](D) to toggle between "TONE," "TSQL," "DTCS" and OFF (icon disappears). eeTouch [TONE](D) for 1 second to display the "TONE" screen. • "Repeater Tone" appears. rrRotate the Dial to select the desired tone squelch frequency. See the table below. • If desired, touch [DEF] for 1 second to reset to the default setting. ttPush MENU (C) to exit the "TONE" screen. yyCommunicate in the normal way. • Subaudible tones are superimposed on your transmit signal. Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) Repeater tone icon Touch [TONE] for 1 second • Selectable tone frequencies (Unit: Hz) 67.0 88.5 114.8 151.4 177.3 203.5 250.3 69.3 91.5 118.8 156.7 179.9 206.5 254.1 71.9 94.8 123.0 159.8 183.5 210.7 74.4 97.4 127.3 162.2 186.2 218.1 77.0 100.0 131.8 165.5 189.9 225.7 79.7 103.5 136.5 167.9 192.8 229.1 82.5 107.2 141.3 171.3 196.6 233.6 85.4 110.9 146.2 173.8 199.5 241.8 Touch for 1 second to reset to default Tone frequency 4-26