Icom IC-7100 Advanced Instructions - Page 92
One-touch repeater function, Repeater operation Continued
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Previous view 4 RECEIVE AND TRANSMIT Repeater operation (Continued) DDOne-touch repeater function This function allows you to set the repeater operation by holding down one switch. First, set the frequency offset as well as the repeater access tone frequency (p. 4-26). qqTouch the Memory channel indication once or twice to select the VFO mode. wwSelect the desired frequency band. (p. 3-6) eeOn the Mode selection screen, touch "FM" to select the FM mode. rrRotate the Dial to set the receive frequency (Repeat- er output frequency). ttPush MENU (C) one or more times to display the "M-2" screen (M-2 menu), then touch [DUP](D) for 1 second to turn ON the one touch repeater function. • "TONE" and "DUP-" appear. • The repeater receive frequency appears above the func- tion menu. • The Split Frequency mode is automatically turned OFF, if it is ON. yyTouch [DUP](D) one or more times to switch the off- set direction. • "DUP-" or "DUP+" appears. uuCommunicate in the normal way. • Subaudible tones are superimposed on your transmit sig- nal. Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) Touch [DUP] for 1 second Touch [DUP] Repeater tone icon Duplex icon Transmit frequency (Repeater input frequency) 4-27