Icom IC-7100 Advanced Instructions - Page 95
Storing a non standard repeater
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Previous view 4 RECEIVE AND TRANSMIT Repeater operation (Continued) DDStoring a non standard repeater qqTurn OFF the Auto Repeater function in the Set mode. (p. 4-29) SET(C) > Function > SPLIT/DUP > Auto Repeater wwWhile the "M-1" menu is selected, touch [A/B](D) to select VFO A. eeRotate the Dial to set the repeater output frequency. rrTouch [A/B](D) to select VFO B. ttRotate the Dial to set the repeater input frequency. yyPush MENU (C) to display the "M-2" screen (M-2 menu), then touch [TONE](D) to turn ON the previously set tone encoder. uuPush MENU (C) to display the "M-1" screen (M-1 menu), then touch [A/B](D) to select VFO A. iiTouch [SPLIT](D) to turn ON the Split function. ooRotate [M-CH](L) to select the desired memory channel. • "BLANK" appears when a blank channel is selected. • Rotate [BANK](L) to select the desired bank, if needed. !0 T ouch [MW](D) for 1 second to store the set contents into the selected memory channel. "M-1" menu Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) "M-2" menu "M-1" menu 4-30 VFO A Touch [A/B] VFO B Push MENU (C) Touch [TONE] Push MENU (C) Touch [A/B] Touch [SPLIT] Split icon Touch [MW] for 1 second