Icom IC-7100 Advanced Instructions - Page 99
RIT function, The RIT Receive Increment Tuning function compen
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Previous view 5 FUNCTIONS FOR RECEIVE RIT function The RIT (Receive Increment Tuning) function compensates for off-frequency operation of the received station. The function shifts the receive frequency up to ±9.99 kHz in 10 Hz steps*, without changing the transmit frequency. *The [M-CH] (L) control tunes in 1 Hz steps when the operating frequency readout is set to the 1 Hz step readout. qqPush RIT (L) to turn ON the RIT function. • "RIT" and the frequency shift appear when this function is ON. wwRotate the [M-CH] (L) control. • When the [M-CH] (L) control acts as the RIT control, the RIT LED lights orange. If the RIT LED is OFF, push the [M-CH] (L) switch one or more times to turn it ON. • P ushing the [M-CH] (L) switch to select the action of the [M-CH/BANK] (L) controls as the Memory/Bank selection, PBT control or RIT control. - When the [M-CH/BANK] (L) controls act as the PBT control, the PBT LED lights green. - When the [M-CH/BANK] (L) controls act as the RIT control, the RIT LED lights orange. (The RIT control is inner control. Outer control is no function.) - When the [M-CH/BANK] (L) controls act as the Memory/Bank selection, both LEDs are OFF. • Hold down [CLR] (L) for 1 second to reset the RIT frequency. • H old down RIT (L) for 1 second to add the frequency shift to the operating frequency. e To cancel the RIT function, push [RIT] again. • "RIT" and the frequency shift disappear. Left Display Center Right The L, R, C or D in the instructions indicate the part of the controller. L: Left side R: Right side C: Center bottom D: Display (Touch screen) RIT LED lights orange [M-CH] [CLR] RIT PBT LED lights green RIT frequency display 5-4