Icom IC-F5330D Instructions

INSTRUCTIONS

Thank you for choosing this Icom product.

READ ALL INSTRUCTIONS

carefully and completely

before using this product.

VHF DIGITAL TRANSCEIVER

|F5330D

UHF DIGITAL TRANSCEIVER

|F6330D

1-1-32 Kamiminami, Hirano-ku,

Osaka 547-0003, Japan

A7656D-1EX-0a

Printed in Japan

© 2021 Icom Inc.

Nov. 2021

IMPORTANT

SAVE THESE INSTRUCTIONS

— This instruction sheet

contains basic operating instructions for the transceiver.

This instruction sheet includes some functions that

are usable only when your dealer presets them. The

transceiver may have other functions and operations that

are not described in this instruction sheet. Ask your dealer

for preset function details.

Icom is not responsible for the destruction, damage to, or

performance of any Icom or non-Icom equipment, if the

malfunction is because of:

•

Force majeure, including, but not limited to, fires,

earthquakes, storms, floods, lightning, other natural

disasters, disturbances, riots, war, or radioactive

contamination.

• The use of Icom transceivers with any equipment that is

not manufactured or approved by Icom.

Icom, Icom Inc. and the Icom logo are registered

trademarks of Icom Incorporated (Japan) in Japan, the

United States, the United Kingdom, Germany, France,

Spain, Russia, Australia, New Zealand, and/or other

countries.

AMBE+2 is a trademark and property of Digital Voice

Systems Inc.

The Bluetooth

®

word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Icom Inc. is under license.

All other products or brands are registered trademarks or

trademarks of their respective holders.

PRECAUTIONS

R

DANGER HIGH RF VOLTAGE! NEVER

touch an

antenna or antenna connector while transmitting. This

could cause an electrical shock or burn.

R

DANGER! NEVER

operate the transceiver near

unshielded electrical blasting caps or in an explosive

atmosphere. This could cause an explosion and death.

R

DANGER! NEVER

place the transceiver where air bag

deployment may be obstructed during mobile operations.

R

WARNING! NEVER

connect the transceiver to an AC

outlet. This may pose a fire hazard or result in an electric

shock.

R

WARNING! NEVER

operate the transceiver during a

lightning storm. It may result in an electric shock, cause

a fire or damage the transceiver. Always disconnect the

power source and antenna before a storm.

R

WARNING! NEVER

let metal, wire, or other objects

contact the transceiver inside or make incorrect contact

with connectors on the rear panel. This could cause an

electric shock or damage the transceiver.

R

WARNING! NEVER

place the transceiver where the

vehicle’s normal operation may be hindered or where it

could cause bodily injury.

R

WARNING! NEVER

operate the transceiver if you

notice an abnormal odor, sound, or smoke. Immediately

turn OFF the power and remove the DC power cable.

Contact your Icom dealer or distributor for advice.

R

WARNING! NEVER

put the transceiver in an unstable

place where the transceiver may suddenly move or fall.

This could cause an injury or damage the transceiver.

CAUTION: DO NOT

connect the transceiver to a power

source of more than 16 V DC such as a 24 V battery. This

could damage the transceiver.

EXPLICIT DEFINITIONS

WORD

DEFINITION

R

DANGER!

Personal death, serious injury or an

explosion may occur.

R

WARNING!

Personal injury, fire hazard or electric

shock may occur.

CAUTION

Equipment damage may occur.

NOTE

If disregarded, inconvenience only. No

risk of personal injury, fire or electric

shock.

CAUTION: DO NOT

cut the DC power cable between

the DC plug and fuse holder. If an incorrect connection is

made after cutting, the transceiver might be damaged.

CAUTION: DO NOT

expose the transceiver to rain, snow

or any liquids. They could damage the transceiver and

microphone.

CAUTION: DO NOT

use the non-specified microphone.

Other microphones have different pin assignments and

may damage the transceiver.

CAUTION: DO NOT

use the transceiver in areas with

temperatures below –30°C (–22°F) or above +60°C

(+140°F), or in areas subject to direct sunlight, such as the

dashboard.

CAUTION: DO NOT

place or leave the transceiver in

excessively dusty environments. This could damage the

transceiver.

CAUTION: DO NOT

use harsh solvents such as Benzine

or alcohol when cleaning. This could damage the

equipment surfaces. If the surface becomes dusty or dirty,

wipe it clean with a soft, dry cloth.

CAUTION: DO NOT

reverse the DC power cable polarity.

This could damage the transceiver.

CAUTION : DO NOT

block the air vent when installing the

transceiver. This transceiver has an air vent on the bottom

panel of the transceiver to meet the IPX4 requirements.

NEVER

place the transceiver in an insecure place to avoid

inadvertent use by unauthorized persons.

NEVER

operate the transceiver without running the

vehicle’s engine. The vehicle’s battery will quickly run out

when the transceiver transmits while the vehicle’s engine

is OFF.

BE CAREFUL!

The transceiver may become hot after

continuously transmitting for long periods of time.

VOICE CODING TECHNOLOGY

The AMBE+2™ voice coding Technology embodied in this

product is protected by intellectual property rights including

patent rights, copyrights and trade secrets of Digital Voice

Systems, Inc. This voice coding Technology is licensed

solely for use within this Communications Equipment.

The user of this Technology is explicitly prohibited from

attempting to extract, remove, decompile, reverse

engineer, or disassemble the Object Code, or in any other

way convert the Object Code into a human-readable form.

U.S. Patent Nos.

#8,595,002, #8,359,197, #8,315,860, #8,200,497,

#7,970,606, and #6,912,495 B2.

ABOUT GPS/GLONASS RECEIVER

DO NOT

install the GPS antenna near the transceiver or

the antenna.

A GPS or GLONASS receiver may not work if the

transceiver transmits or receives in the frequency ranges

as shown below.

For the IC-F5330D

(Unit: MHz)

GPS Receiver

GLONASS Receiver

Transmit

142.850 ~ 142.860

145.275 ~ 145.945

157.135 ~ 157.145

159.805 ~ 160.540

Receive

146.845 ~ 147.110

149.745 ~ 150.790

For the IC-F6330D

(Unit: MHz)

GPS Receiver

GLONASS Receiver

Transmit

400.000 ~ 401.343

Receive

443.545 ~ 444.065

449.335 ~ 451.425

For the European versions:

CAUTION:

Hot surfaces.

DO NOT

touch

the transceiver’s surface after continuously

transmitting for long periods of time. The

transceiver’s chassis radiates heat, and it

will become hot to protect the power

amplifier unit from overheating. Touching it

may cause a burn.

ABOUT CE AND DOC

Hereby, Icom Inc. declares that the versions

of IC-F5330D and IC-F6330D which have

the “CE” symbol on the product, comply with

the essential requirements of the Radio

Equipment Directive, 2014/53/EU, and the

restriction of the use of certain hazardous substances in

electrical and electronic equipment Directive, 2011/65/EU.

The full text of the EU declaration of conformity is available

at the following Internet address:

https://www.icomjapan.com/support/

DISPOSAL

The crossed-out wheeled-bin symbol on your

product, literature, or packaging reminds you

that in the European Union, all electrical and

electronic products, batteries, and

accumulators (rechargeable batteries) must

be taken to designated collection locations at

the end of their working life. Do not dispose

of these products as unsorted municipal waste. Dispose of

them according to the laws in your area.

About E-marking:

Detailed installation notes for

Icom mobile transceivers to be fitted into vehicles are

available. Please contact your Icom dealer or distributor.

To ensure that your exposure to RF

electromagnetic energy is within the FCC

and IC allowable limits for occupational

use, always adhere to the following

guidelines:

•

DO NOT

operate the radio without a proper antenna

attached, as this may damage the radio and may also

cause you to exceed FCC and IC RF exposure limits.

A proper antenna is the antenna supplied with this

radio by the manufacturer or an antenna specifically

authorized by the manufacturer for use with this radio.

•

DO NOT

transmit for more than 50% of total radio

use time (“50% duty cycle”). Transmitting more than

50% of the time can cause FCC and IC RF exposure

compliance requirements to be exceeded. The radio is

transmitting when the status indicator lights red. You

can cause the radio to transmit by pressing the [PTT]

switch.

Electromagnetic Interference/Compatibility

During transmissions, your Icom radio generates RF

energy that can possibly cause interference with other

devices or systems. To avoid such interference, turn off

the radio in areas where signs are posted to do so. DO

NOT operate the transmitter in areas that are sensitive to

electromagnetic radiation such as hospitals, aircraft, and

blasting sites.

SAFETY TRAINING INFORMATION

Your Icom radio generates RF

electromagnetic energy during transmit

mode. This radio is designed for and

classified as “Occupational Use Only,”

meaning it must be used only during the

course of employment by individuals

aware of the hazards, and the ways to

minimize such hazards. This radio is

NOT intended for use by the “General Population” in an

uncontrolled environment.

For compliance with FCC and IC RF Exposure

Requirements, the transmitter antenna installation shall

comply with the following three conditions:

1.

The transmitter antenna gain shall not exceed 0 dBi.

2.

IC-F5330D:

The antenna is required to be located outside of a

vehicle and kept at a distance of 57 centimeters

(23 inches) or more between the transmitting antenna

of this device and any persons during operation. For

small vehicle as worst case, the antenna shall be

located on the roof top at any place on the center line

along the vehicle in order to achieve 57 centimeters

(23 inches) separation distance. In order to ensure this

distance is met, the installation of the antenna must

be mounted at least 57 centimeters (23 inches) away

from the nearest edge of the vehicle in order to protect

against exposure to bystanders.

2. IC-F6330D:

The antenna is required to be located outside of a

vehicle and kept at a distance of 41 centimeters

(17 inches) or more between the transmitting antenna

of this device and any persons during operation. For

small vehicle as worst case, the antenna shall be

located on the roof top at any place on the center line

along the vehicle in order to achieve 41 centimeters

(17 inches) separation distance. In order to ensure this

distance is met, the installation of the antenna must

be mounted at least 41 centimeters (17 inches) away

from the nearest edge of the vehicle in order to protect

against exposure to bystanders.

3.

IC-F5330D:

Transmit only when people outside the vehicle are

at least the recommended minimum distance of

136 centimeters (54 inches) away from the properly

installed antenna. This separation distance will

ensure that there is sufficient distance from a properly

installed externally-mounted antenna to satisfy the RF

exposure requirements in the applicable RF exposure

compliance standards.

3.

IC-F6330D:

Transmit only when people outside the vehicle are

at least the recommended minimum distance of

117 centimeters (47 inches) away from the properly

installed antenna. This separation distance will

ensure that there is sufficient distance from a properly

installed externally-mounted antenna to satisfy the RF

exposure requirements in the applicable RF exposure

compliance standards.

FCC INFORMATION

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when

the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause

harmful interference to radio communications.

Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be

required to correct the interference at his own expense.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the condition that this device does

not cause harmful interference.

CAUTION:

Changes or modifications to this transceiver,

not expressly approved by Icom Inc., could void

your authority to operate this transceiver under FCC

regulations.

SUPPLIED ACCESSORIES

PoE compatible

Microphone

(Self grounding type)

Microphone hanger

and screw

(M4×16 mm)

Mounting bracket

DC power cable

Bracket bolts

Mounting screws

(M5×12 mm)

Self-tapping

screws

(M5×20 mm)

Flat washers

Spring washers

Nuts

NOTE:

Some accessories are not supplied, or the shape

is different, depending on the transceiver version.

REPLACING FUSES

Fuses are installed in the supplied DC power cable. If a

fuse blows, track down the source of the problem, repair it,

and replace the damaged fuse with a new rated one.

L

The shape of fuses and its cases are different,

depending on the supplied DC power cable.

L

Fuse rating: 32 V, 20 A for the OPC-2478

250 V, 10 A for the OPC-2479

NOTE:

Use only specified fuses (10 A or 20 A).

25 W transceiver: 10 A, 45 W or 50 W transceivers: 20 A

OPTIONS

•

SP-30/SP-35/SP-35L

EXTERNAL SPEAKERS

Input impedance: 4

ø

SP-35/SP-35L: Rated input 5 W, Maximum input 7 W

SP-30:

Rated input 20 W, Maximum input 30 W

•

OPC-1939/OPC-2078

ACC CABLE

Used to connect an external device.

OPC-1939:

D-sub 15-pin, an external level converter

(user supplied) is required.

OPC-2078:

D-sub 25-pin, built-in level converter

•

OPC-2478/OPC-2479

DC POWER CABLE

•

VS-3

Bluetooth

®

HEADSET

The Bluetooth headset with a [PTT] switch.

•

About the third party Bluetooth

®

headsets:

Icom has checked the PTT operation with some 3M

Peltor headsets such as the WS Headset XP, WS ProTac

XP and WS Alert XP. (Compatibility not guaranteed.)

ANTENNA

A key element in the performance of any communication

system is the antenna. Contact your dealer for information

regarding antennas and how to install them.

OPC-2478

OPC-2479

Fuse Coding explanation:

OPC-2478

Fuse Coding:

Fuse Voltage Rating:

Fuse Current Rating:

FUSE 32 V 20 A

32 Volts

20 Amperes

OPC-2479

Fuse Coding:

Fuse Voltage Rating:

Fuse Current Rating:

FUSE 250 V 10 A

250 Volts

10 Amperes

Icom IC-F5330D Instructions

Icom IC-F5330D Manual

Icom IC-F5330D manual content summary: