Icom ID-31A Instruction Manual
Icom ID-31A Manual
 |
View all Icom ID-31A manuals
Add to My Manuals
Save this manual to your list of manuals |
Icom ID-31A manual content summary:
- Icom ID-31A | Instruction Manual - Page 1
INSTRUCTION MANUAL UHF TRANSCEIVER ID-31A UHF TRANSCEIVER ID-31E This device complies with Part 15 of the FCC Rules. Operation undesired operation. WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW. The photo shows - Icom ID-31A | Instruction Manual - Page 2
for purchasing this fine Icom product. The ID-31A or ID-31E uhf transceiver is designed and build with Icom's superior technology and craftsmanship combining traditional analog technologies with the new digital technology, Digital Smart Technologies for Amateur Radio (D-STAR), for a balanced package - Icom ID-31A | Instruction Manual - Page 3
before using the transceiver. SAVE THIS INSTRUCTION MANUAL- This instruction manual contains important operating instructions for the ID-31A/ID-31E. FCC INFORMATION • FOR CLASS B UNINTENTIONAL RADIATORS: This equipment has been tested and found to comply with the limits for a Class B digital device - Icom ID-31A | Instruction Manual - Page 4
tery pack. R DANGER! Use and charge only specified Icom battery packs with Icom radios or Icom chargers. Only Icom battery packs are tested and approved for use with Icom radios or charged with Icom chargers. Using third-party or counterfeit battery packs or chargers may cause smoke, fire, or cause - Icom ID-31A | Instruction Manual - Page 5
, [DATA/DC IN] cap and [micro SD] slot cap are attached. 7 The BP-273 meets IPX4 requirements for splash resistance. 8 When it is connected, the transceiver corresponds to IPX4. 9 Even when the transceiver power is OFF, a slight current still 10 flows in the circuits. Remove the battery pack - Icom ID-31A | Instruction Manual - Page 6
not indicate a transceiver malfunction. • T , please do not cover the ID-31A or ID-31E with anything that will block the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries. APRS - Icom ID-31A | Instruction Manual - Page 7
the CD. • D-STAR Quick Guide Quick reference guide for the DR (D-STAR Repeater) mode operation, and is the same as the supplied leaflet • Instruction manual Instructions for the basic operation, the same as this manual • Advanced Instructions Instructions for the advanced operations and more - Icom ID-31A | Instruction Manual - Page 8
SUPPLIED ACCESSORIES The following accessories are supplied with the transceiver. q Antenna 1 w Hand strap 1 e Battery charger (BC-167SA/SD/SV 1 r Belt clip 1 t Battery pack (BP-271 1 y CD 1 * Not supplied, or the shape is different, depending on the transceiver version. q w e r t y - Icom ID-31A | Instruction Manual - Page 9
11 ■■Regular charging 13 ■■Rapid charging 14 ■■Optional battery case 15 ■■Battery information 17 ■■External DC power operation 18 5 BASIC and default settings 33 4 7 RESETTING 50 5 ■■ Resetting 50 6 8 TROUBLESHOOTING 51-52 7 9 SPECIFICATIONS 53 8 10 OPTIONS 54-60 ■■Optional HM- - Icom ID-31A | Instruction Manual - Page 10
, follow the illustrations below. To attach To detach Hand strap 1 w q Battery pack or battery case q q w Even when the transceiver power is OFF, a small current still flows in the radio. Remove the battery pack or case from the transceiver when not using it for a long time. Otherwise, the - Icom ID-31A | Instruction Manual - Page 11
ACCESSORY ATTACHMENT ■■Belt clip To attach the belt clip: qqRemove the battery pack from the transceiver, if it is at- tached. (p. 1) wwSlide the belt clip in the direction of the arrow until the belt clip locks in place, and makes a 'click' sound. To detach the belt clip: qqRemove the battery - Icom ID-31A | Instruction Manual - Page 12
microSDHC card is not supplied with the transceiver. Please purchase a desired card to use. Icom has checked compatibility with the following microSD , transceiver settings, GPS information, and other data. Following data can be stored onto the card. • Memory channel contents • Repeater list • - Icom ID-31A | Instruction Manual - Page 13
in the following way to get card's best performance. 4 IMPORTANT! Formatting a card erases all its data. Before formatting any 5 programmed card, make a backup file onto your PC. 6 qqTurn ON the transceiver. 7 wwPush [MENU] to enter the 8 Menu screen. eePush D-pad(E) to select the root - Icom ID-31A | Instruction Manual - Page 14
a signal or when the squelch is open; lights red while transmitting. e PTT SWITCH [PTT] (p. 25) Hold down to transmit, release to receive. For ID-31E only Push briefly, then hold down to transmit a 1750 Hz tone burst. r SQUELCH KEY [SQL] (p. 20) ➥➥ Hold down to temporarily open the squelch - Icom ID-31A | Instruction Manual - Page 15
to turn the transceiver power ON or OFF. (p. DATA JACK [DATA] Connects to a PC through the optional OPC-2218LU data communication cable, for low-speed data communication in the DV mode or for cloning. The jack is also used to connect an external GPS receiver. See the PDF type Advanced Instruction - Icom ID-31A | Instruction Manual - Page 16
e display (p. 9) !4 r !3 t !2 y !1 u !0 o i Internal microphone Speaker D-pad (p. 8) !4 EXTERNAL SPEAKER/MICROPHONE JACK [SP/MIC] Connect a cloning cable, optional speaker microphone or headset, if desired. See page 54 for a list of available options. Be sure to turn power OFF - Icom ID-31A | Instruction Manual - Page 17
CS] ➥ Hold down for 1 second to set the received call signs (station and repeaters) to operating call sign. • W hile holding down this key, rotate [DIAL] select push to move the value or option selector bar up. (p. 32) DR (D-STAR REPEATER)/DOWN KEY [DR] ➥ Hold down 1 second to enter the DR mode. - Icom ID-31A | Instruction Manual - Page 18
or Break-in (BK) mode is selected. See the PDF type Advanced Instruction's Section 4 for more details. y TONE ICONS (PDF type Advanced Instruction's Section 11) • While operating in FM/FM-N mode: ➥➥ "T ONE" appears while the Repeater Tone Encoder is ON. (p. 29) ➥➥ "TSQL" appears while the Tone - Icom ID-31A | Instruction Manual - Page 19
➥➥ "L OW" appears when low power is selected. ➥➥ "M ID" appears when mid power is selected. ➥➥ No icon appears when high power is selected. !6 M EMORY NAME DISPLAY (PDF type Advanced Instruction's Section 7) While in the Memory mode, the programmed memory or memory bank name is displayed - Icom ID-31A | Instruction Manual - Page 20
shorting. This may damage not only the battery pack, but also the transceiver. • R DANGER! Use and charge only specified Icom battery packs with Icom radios or Icom chargers. Only Icom battery packs are tested and approved for use with Icom radios or charged with Icom chargers. Using third-party or - Icom ID-31A | Instruction Manual - Page 21
10 to the transceiver) into the charger if it is wet or soiled. This could corrode the battery charger terminals or damage the 11 charger. The charger is not waterproof. 12 • CAUTION: DO NOT charge the battery outside of the speci- fied temperature range: 0˚C to +40˚C (+32˚F to +104˚F). 13 Icom - Icom ID-31A | Instruction Manual - Page 22
transmit (see p. 18 for more details). • T he external DC power supply voltage must be between 10-16 V to charge the battery pack and when operating using an OPC-254L. 13 Transceiver • BC-167S • CP-12L (Optional) to [DC IN] to AC outlet The BC-167SA, BC-167SD and BC-167SV have different - Icom ID-31A | Instruction Manual - Page 23
have problems charging a new battery pack. • NEVER place the transceiver with the battery pack to the desktop charger when the transceiver is -16V] jack. AC Adapter Battery pack (A different type, or no AC adapter is supplied, depending on the version.) Transceiver (with battery pack) - Icom ID-31A | Instruction Manual - Page 24
OPC-515L DC power cable NEVER connect the OPC-515L to a power source using reverse polarity. This will ruin the battery charger. White line: + Black line: - NOTE: If the charging indicator blinks orange for 10 seconds or more with the battery pack installed in the transceiver, try charging the BP - Icom ID-31A | Instruction Manual - Page 25
brand, type and capacity. Also, do not mix new and old batteries together. • Keep the battery terminals clean. It's a good idea to periodically clean the battery terminals. • Never incinerate used battery cells since the internal battery gas may cause them to rupture. • Never expose a detached - Icom ID-31A | Instruction Manual - Page 26
appears when the BP-271 or BP-272 Li-ion battery pack is attached to the transceiver. • W hen the BP-273 battery case is attached to the transceiver, the battery icon cannot display the battery capacity of the alkaline batteries. The battery icon stays " ," and it does not reflect with the true - Icom ID-31A | Instruction Manual - Page 27
jack of the transceiver. • BE SURE to use a CP-12L, CP-19R or OPC-254L when connecting a regulated 12 V DC power supply. Use an external DC-DC converter to connect the transceiver battery pack. • Disconnect the power cables from the transceiver when not using it. Otherwise, the vehicle battery - Icom ID-31A | Instruction Manual - Page 28
5 BASIC OPERATION ■■Power ON ➥➥Hold down for 1 second to turn ON power. • Hold down for 1 second to turn OFF power. • After the opening message and power source voltage are dis- played, the operating frequency appears. ■■Setting audio volume ➥➥Rotate [VOL] to adjust the audio level. • If - Icom ID-31A | Instruction Manual - Page 29
BASIC OPERATION 5 ■■Setting squelch level The squelch function mutes the noise or received audio signal, depending on the signal strength and the squelch control setting to cut off the noise output. ➥➥While holding down [SQL], rotate [DIAL] to select the squelch level. • W hile holding down [SQL - Icom ID-31A | Instruction Manual - Page 30
Push [V/MHz] to select the VFO mode. • VFO mode display DDMemory mode Memory mode is used for operation on memory channels, which store programmed frequencies. qqPush [M/CALL] once or twice to select the memory mode. • " " appears when the memory mode is selected. • P ush [M/CALL] again - Icom ID-31A | Instruction Manual - Page 31
re- 3 peater operation. In this mode, you can easily select the pre- programmed repeaters and UR call signs by rotating [DIAL]. 4 5 D-STAR is an abbreviation for Digital Smart Technologies for Amateur Radio. 6 7 qqHold down for 1 seconds to select the DR mode. 8 • DR mode display 9 10 - Icom ID-31A | Instruction Manual - Page 32
5 BASIC OPERATION ■■Setting a tuning step The following tuning steps are selectable. • 5.0 kHz • 6.25 kHz • 10.0 kHz • 15.0 kHz • 20.0 kHz • 25.0 kHz • 50.0 kHz • 100.0 kHz • 125.0 kHz • 12.5 kHz • 30.0 kHz • 200.0 kHz D Tuning step selection q Push [V/MHz] to select VFO mode, if necessary. - Icom ID-31A | Instruction Manual - Page 33
by the modulation of the radio signals. The transceiver has a total of three charged BP-271 or BP-272 battery pack, or a 2 BP-273 battery case with brand new alkaline batteries is at- 3 tached (pp. pulse counting system. 11 • Hold down [SQL] to manually open the squelch. t W hen a signal is - Icom ID-31A | Instruction Manual - Page 34
SQL • T he S/RF meter shows the output power level. eeSpeak into the microphone using your normal voice level. • DO NOT hold the transceiver too close to your mouth or speak too loudly. This may distort your speech. r Release [PTT] to receive. Microphone R WARNING! NEVER transmit for - Icom ID-31A | Instruction Manual - Page 35
OPERATION 5 ■■Transmit power selection The transceiver has four output power levels to suit your operating requirements. Lower output power during short-range communications may reduce the possibility of interference to other stations and will conserve battery power. ➥➥H old down [LOW] for - Icom ID-31A | Instruction Manual - Page 36
to select the desired scanning type. D-pad (Ent) (�) • Select "ALL" for full scan, "P-LINKx" for programmed link scan (x= 0 to 9), "Pxx" for programmed scan (xx= 0 to 24; only programmed scan edge numbers are displayed), "DUP" for duplex scan or "TONE" for tone scan. t P ush D-pad(Ent - Icom ID-31A | Instruction Manual - Page 37
] one or more times to select a desired operat- ing mode. ➥ Set other data (e.g. duplex di- rection, frequency offset, tone squelch, etc.), if desired. e Hold to hold down [S.MW] for 1 second after 11 programming. 12 13 After programming is finished, return 14 to the VFO mode 15 - Icom ID-31A | Instruction Manual - Page 38
from the receive frequency by the frequency offset (p. 33). This is called duplex operation. It is convenient to program repeater information into memory channels (p. 28). Repeater 434.700 MHz 434.700 MHz 439.700 MHz 439.700 MHz Uplink (transmitting freq.) Downlink (receiving freq.) Station - Icom ID-31A | Instruction Manual - Page 39
BASIC OPERATION 5 1 DDSetting the duplex direction qqIn the VFO mode, push to open the Quick Menu screen. DDSetting the subaudible tone 2 qqIn the VFO mode, push to open 3 the Quick Menu screen. 4 5 wwPush D-pad(#) to select the "DUP" item, then push D-pad(Ent). D-pad (Ent) (�) wwPush - Icom ID-31A | Instruction Manual - Page 40
Scope display Sweep marker Weak level The signal on the 434.390 MHz About the sweep steps: The specified tuning step (in VFO mode) or programmed tuning step (in memory mode) is used during sweep. If the tuning step is set to wide, the present signal may not be displayed (may - Icom ID-31A | Instruction Manual - Page 41
OPERATION ■■Menu item selection 1 The MENU screen is used for programming infrequently DD Entering the Menu screen and operation 2 changed values or 15 screen. 16 To return to the default setting, push 17 Menu lists in step r to display "Default," 18 and then push D-pad(Ent). 19 32 - Icom ID-31A | Instruction Manual - Page 42
settings may differ, depending on the version. DUP/TONE... In this item, set the repeater options, for example duplex offset or the channel tone types. Offset Freq RANGE OR VALUE pocket beep function. Digital Code 00~99 33 Selects the digital code for the Digital Code squelch function. - Icom ID-31A | Instruction Manual - Page 43
for a VFO mode scan. 10 Bank Link Program Link*1 A:□✔~Z:□✔ Selects banks to be scanned during a 11 Bank Link Scan. 12 Selects program scans to be scanned during a the Program Link Scan. 13 14 15 16 17 18 *1 See the PDF type Advanced Instruction for details on the preset 19 values - Icom ID-31A | Instruction Manual - Page 44
or forward the recorded audio when you push the *2 Be sure to insert the microSD card into the fast-rewind or fast-forward key during transceiver before selecting these items. playback. DV Auto Reply*2 Records a voice audio to use the Auto Reply function in the DV mode. 35 - Icom ID-31A | Instruction Manual - Page 45
DESCRIPTIONS OFF, Internal GPS, Selects a GPS receiver that the trans- 4 External GPS or Manual ceiver receives its position data from. 5 Power Save (Internal GPS) OFF, 1min, 2min, 4min, 8min or Auto GPS receiver that is output to the 17 [DATA] jack. 18 19 ☞ Continues on the next page. 36 - Icom ID-31A | Instruction Manual - Page 46
GPS Logger Only>> *2 Be sure to insert the microSD card into the transceiver before selecting these items. Turns ON the GPS logger function with the transceiver in the Sleep mode. Selects an operating mode to transmit position data received from a GPS receiver. OFF Turns OFF the GPS TX function - Icom ID-31A | Instruction Manual - Page 47
API31,DSTAR* Enters an unproto Address. Data Extension OFF or Course/Speed Selects whether to transmit the course 7 and speed data. 8 -A Symbol to transmit. 12 SSID - - -, (-0), -1~-15 or -A~-Z Selects the APRS® call sign SSID. 13 Comment Enters a comment to transmit. 14 GPS Auto TX - Icom ID-31A | Instruction Manual - Page 48
to use in the DV and DR modes. Your Call Sign Repeater List*1 None 01:~20: Stores station call signs. Stores repeater information. NOTE: The repeater list described on this manual may differ from your presetting. 39 *1 See the PDF type Advanced Instruction for details on the preset values. - Icom ID-31A | Instruction Manual - Page 49
6 MENU SCREEN OPERATION NOTE: The default settings, shown below, are for the USA version. 1 The default settings may differ, depending on the version. 2 My Station In this item, set your own call sign to use in the DV mode. 3 My Call Sign TX Message RANGE OR VALUE (Default is shown in bold) - Icom ID-31A | Instruction Manual - Page 50
or Auto DESCRIPTIONS Selects the Automatic Reply function ON, OFF or Voice. Selects manually or automatically to transmit low speed data. Selects the DV mode RX monitoring when [SQL] is held down. Turns the digital repeater setting function ON or OFF. Turns the RX call sign automatic write function - Icom ID-31A | Instruction Manual - Page 51
ceived, the audio (voice) will be heard at the specified level even the volume 12 setting level is set to minimum level, or 13 digital call sign/digital code squelch is turned ON. 14 EMR AF Level 0~19~39 Sets the audio output level when an EMR 15 mode signal is received - Icom ID-31A | Instruction Manual - Page 52
6 MENU SCREEN OPERATION ■ Menu items and default settings (Continued) NOTE: The default settings, shown below, are for the USA version. The default settings may differ, depending on the version. SPEECH In this item, set the Speech functions. RX Call Sign SPEECH RANGE OR VALUE (Default is shown - Icom ID-31A | Instruction Manual - Page 53
4 OFF, Auto (Short), Auto (Middle) or Auto (Long) Selects the Power Save options to re- duce current drain and conserve battery 5 power. 6 Monitor Dial Speed-UP Auto Repeater Push or Hold OFF or ON OFF or ON (DUP), ON (DUP,TONE) Selects the [SQL] monitor function method. 7 Turns the - Icom ID-31A | Instruction Manual - Page 54
other options. MIC Gain (Internal) MIC Gain (External) Data Speed RANGE OR VALUE (Default is shown in bold) data transmission speed for low-speed communication, or between the [DATA] jack and external modules like a GPS receiver, and so on. VOX VOX VOX Level VOX Delay VOX Time-Out Timer Headset - Icom ID-31A | Instruction Manual - Page 55
(Continued) In this item, set other options. CI-V CI-V Address RANGE OR VALUE (Default is shown in bold) 01~84~DF CI-V Baud Rate CI-V Transceive 300, 1200, 4800, 9600, 19200 or Auto OFF or ON Display In this item, set the Display options. RANGE OR VALUE (Default is shown in - Icom ID-31A | Instruction Manual - Page 56
, or other text. Selects whether or not to display the opening message at power ON. Selects whether or not to display the voltage of the battery or external DC power source at power ON. Selects the display language in the DR mode or Menu mode. When "English" is selected in System - Icom ID-31A | Instruction Manual - Page 57
output capability during a sweep by the Band Scope function. 11 12 DESCRIPTIONS 13 Sets the current date and time. 14 Selects if the time data is automatically 15 corrected by a received GPS sentence. Enters the time difference between UTC 16 and the local time. 17 Turns the Auto power - Icom ID-31A | Instruction Manual - Page 58
options. Setting Load File selection RANGE OR VALUE (Default is shown in bold) DESCRIPTIONS ALL, Except My Station, Repeater List Only Loads the settings file to the transceiver. Setting Save SD Card Info Format File selection Saves the settings as a new file. Overwrites the - Icom ID-31A | Instruction Manual - Page 59
again. If the problem persists, perform either or both procedures be- turn ON power to partially reset the transceiver. • "PARTIAL RESET repeater lists. 13 14 • All reset 15 Reset the CPU, if the internal CPU mal- functions due to static electricity, etc. All 16 reset clears all programming - Icom ID-31A | Instruction Manual - Page 60
8 TROUBLESHOOTING If your transceiver seems to be malfunctioning, please check the following points before sending it to a service center. PROBLEM POSSIBLE CAUSE SOLUTION REF. Transceiver does not turn • The battery is exhausted. ON. • The battery polarity is reversed. • Loose connection - Icom ID-31A | Instruction Manual - Page 61
TROUBLESHOOTING 8 • While operating D-STAR 1 PROBLEM POSSIBLE CAUSE SOLUTION REF. 2 After your call, the repeater • The repeater setting is wrong. does not transmit a reply. • Set the correct repeater. Advanced • Correct the repeater frequency, frequency offset, or Instruction 3 - Icom ID-31A | Instruction Manual - Page 62
stability : ±2.5 ppm (-20°C to +60°C; -4°F to +140°F) • Power supply : 10.0-16.0 V DC for external DC power, or specified Icom's battery pack • Digital transmission speed : 4.8 kbps • Voice coding speed : 2.4 kbps • Current drain (at 7.4 V DC) : TX (at 5 W) Less than 2.5 A RX Max - Icom ID-31A | Instruction Manual - Page 63
Rapidly charges BP-271 li-ion battery pack in approximately 2 hours. Rapidly charges BP-272 li-ion battery pack in approximately 3.5 hours. • HM-153/HM- 166/HM-186/SP-13 to the transceiver. 14 • HS-94/HS-95/HS-97 headset 15 +OPC-2006LS plug adapter cable HS-94 : Ear hook type 16 HS-95 : - Icom ID-31A | Instruction Manual - Page 64
and charging via an external power supply. • OPC-2218LU data communication cable Allows low-speed data communication in the DV mode, or data cloning operation with CS-31 (free download software). • LC-178 carrying case Helps protect the transceiver from scratches, etc. • AD-92SMA antenna connector - Icom ID-31A | Instruction Manual - Page 65
VFO mode and Memory mode [p] Frequency or memory channel 'UP' 12 Earphone jack [q] Frequency or memory channel 'DOWN' 13 The HM-75LS has a lock OFF when plugging or unplugging the HM-75LS to and from the [SP/MIC] jack. The SIMPLE mode can select only three channels, and is 14 useful for - Icom ID-31A | Instruction Manual - Page 66
. [A] Enters UR call sign or link repeater selection (TO) [B] Enters Access repeater selection (FROM) [p] Selects 'UP' on the displayed items [q] Selects 'DOWN' on the displayed items ■■LC-178 carrying case CAUTION: When removing the carrying case from the transceiver, slide the side parts to the - Icom ID-31A | Instruction Manual - Page 67
the headset type 2 operation. qqTurn ON the transceiver. 3 An optional HS-94, HS-95 or HS-97 headset and the OPC2006LS plug adapter cable are down for 1 second to turn the power OFF. w R emove the jack cover. (M ENU ➪ FUNCTION ➪ VOX ➪ Headset 9 e C onnect the HS-94, HS-95 or HS-97 and - Icom ID-31A | Instruction Manual - Page 68
push D-pad(E) to select, and then D-pad(Ent) to enter, one or more times until the last screen is displayed. r W hile speaking into the headset mi- crophone, adjust the VOX Level until "VOX" continuously appears. • T he VOX Level can be adjusted be- "VOX" tween 1 (minimum) and 10 (maximum - Icom ID-31A | Instruction Manual - Page 69
the function OFF, select "OFF." (default: 3) 4 (MENU➪ FUNCTION➪ VOX➪ VOX Time-out Timer) 5 6 7 8 9 The VOX Time-Out Timer must be set shorter than the 10 transceiver Time-Out Timer, otherwise this timer will not be activated. 11 12 13 14 15 16 17 18 19 60 - Icom ID-31A | Instruction Manual - Page 70
11 COUNTRY CODE LIST • ISO 3166-1 Country 1 Austria 2 Belgium 3 Bulgaria 4 Croatia 5 Czech Republic 6 Cyprus 7 Denmark 8 Estonia 9 Finland 10 France 11 Germany 12 Greece 13 Hungary 14 Iceland 15 Ireland - Icom ID-31A | Instruction Manual - Page 71
be stored onto a card 3 5 Continuous Sweep 31 6 CONTROL DIAL 7 7 COUNTRY CODE LIST 61 CS (CALL SIGN) KEY 8 8 D 9 10 DATA JACK 6 DC IN JACK 6 11 DIAL 7 12 DOWN KEY 8 D-PAD 8 13 DR (D-STAR REPEATER) KEY 8 14 DR (D-STAR Repeater) mode 22 DUPLEX ICON 9 15 16 E 17 EMR/BK ICON - Icom ID-31A | Instruction Manual - Page 72
DEFINITIONS ii EXTERNAL DC IN JACK 6 External DC power operation 18 EXTERNAL SPEAKER/MICROPHONE JACK 7 F FCC INFORMATION ii FEATURES SELECT MEMORY WRITE KEY... ...... 6 MEMORY CHANNEL NUMBER 10 Memory channel programming 28 MEMORY ICON 10 Memory mode 21 MEMORY NAME DISPLAY 10 Menu items - Icom ID-31A | Instruction Manual - Page 73
Optional battery case 14 Receiver 53 1 Receiving 24 Regular charging 13 2 Repeater operation 29 3 Resetting 50 RF METER 10 4 RIGHT 8 7 S 8 Scan function 27 9 Selecting the headset type 58 SELECT MEMORY WRITE KEY 6 10 Setting a JACK 7 SPECIFICATIONS 53 17 SQUELCH KEY 5 18 S/RF - Icom ID-31A | Instruction Manual - Page 74
INDEX SUPPLIED ACCESSORIES vii Sweep operation 31 T TONE ICONS 9 Transmit power selection 26 Transmitter 53 Transmitting 25 TROUBLESHOOTING 51 Tuning step selection 23 Turning the VOX function ON or OFF 59 TX/RX INDICATOR 5 U UP KEY 8 Usable microSD cards 3 V VFO/MHz • CLEAR • OUTPUT - Icom ID-31A | Instruction Manual - Page 75
MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 66 - Icom ID-31A | Instruction Manual - Page 76
MEMO 67 - Icom ID-31A | Instruction Manual - Page 77
MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 68 - Icom ID-31A | Instruction Manual - Page 78
MEMO 69 - Icom ID-31A | Instruction Manual - Page 79
MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 70 - Icom ID-31A | Instruction Manual - Page 80
■ LT ■ LU ■ MT ■ NL ■ PL ■ PT ■ SK ■ SI ■ ES ■ SE ■ GB ■ IS ■ LI ■ NO ■ CH ■ BG ■ RO ■ TR ■ HR A-6986H-1EX Printed in Japan © 2011 Icom Inc. Printed on recycled paper with soy ink. 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
 |
 |
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
WARNING:
MODIFICATION OF THIS DEVICE TO RECEIVE CEL-
LULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED
UNDER FCC RULES AND FEDERAL LAW.
INSTRUCTION MANUAL
ID-31A
UHF TRANSCEIVER
ID-31E
UHF TRANSCEIVER
The photo shows the
ID-31E version.