Icom RS-BA1 Quick Reference Guide

Icom RS-BA1 Manual

Get Icom RS-BA1 PDF manuals and user guides View all Icom RS-BA1 manuals
Add to My Manuals
Save this manual to your list of manuals

Icom RS-BA1 manual content summary:

  • Icom RS-BA1 | Quick Reference Guide - Page 1
    rs- ba1 remote control software quick reference guide
  • Icom RS-BA1 | Quick Reference Guide - Page 2
    to the RS-BA1 Locally 4 Finding the IP of your Base Station Computer 4 Setting up Port Forwarding ... 5 Setting up the RS-BA1 Remote Utility Software for the Base Station 8 Connection Errors ... 16 Setting up the RS-BA1 Remote Control Software 17 Accessing the RS-BA1 Remotely over
  • Icom RS-BA1 | Quick Reference Guide - Page 3
    Internet (different Network than the Icom radio network) with exceptions enabled in the Firewall setting. x CAT-­‐5 Straight cables x Both Base and Remote Stations computers should have the most latest RS-­‐BA1 driver and software installed (1.2 or Up) 2
  • Icom RS-BA1 | Quick Reference Guide - Page 4
    list, make sure to Add Remote Control and Remote Utility software's on the Base Station Computer. You can remotely control the radio only if on the Base Station Remote Utility Software is up and running. The software should NOT be connected to the
  • Icom RS-BA1 | Quick Reference Guide - Page 5
    Connecting to the RS-BA1 Locally Finding the IP of your Base Station Computer 1. Click Start. 2. Click Run. 3. Type "cmd". 4. Click OK. 5. In the Command window, type "ipconfig". 6. Press Enter on your keyboard. 4
  • Icom RS-BA1 | Quick Reference Guide - Page 6
    setting up the RS-­‐BA1 software. In the following example, the Base Station computer's IP is 192.168.3.106 Setting up Port Forwarding 1. Log into your router. The Linksys RV 042 is shown for example purposes only. 2. Click Setup. 3. Click Forwarding
  • Icom RS-BA1 | Quick Reference Guide - Page 7
    5. Enter RS-­‐BA1 in the Service Name field. 6. Select UDP in the Protocol field. 7. Enter the Port Range from 50001 to 50003. 8. Click Add to List. 9. Once you see the RSBA 1 in the list, click Update this service. 6
  • Icom RS-BA1 | Quick Reference Guide - Page 8
    10. Select the RSBA1 UDP port in the Service field. 11. Enter your Base Station's Computer IP in the IP Address field. 12. Click the Enable Checkbox. 13. Click Add to List. 7
  • Icom RS-BA1 | Quick Reference Guide - Page 9
    14. After your see the RSBA1 ports forwarding box, Click Save Settings. Setting up the RS-BA1 Remote Utility Software for the Base Station 1. Open the RS-­‐BA1 Remote Utility Software. 2. Select Network Setting. 8
  • Icom RS-BA1 | Quick Reference Guide - Page 10
    3. Enter your Computer's Name in the PC Name field. 4. Choose FTTH in the Internet Access Line field. 5. Click Apply. 6. Close (exit) the RS-­‐BA1 Remote Utility software and open it again. 9
  • Icom RS-BA1 | Quick Reference Guide - Page 11
    7. Select Server Setting. 8. Click the User List tab. 9. Enter your User ID and password 10. Click the Administrator Checkbox 11. Click Add. Record/save your user ID and password for future reference. 12. Click OK 10
  • Icom RS-BA1 | Quick Reference Guide - Page 12
    field. 16. Click the CI-­‐V checkbox and enter your CI-­‐V address in the Address field. This information is available in the Instruction manual for your radio or in the Set Mode window. 17. Click the Public Checkbox. 18. Click User Permission. 11
  • Icom RS-BA1 | Quick Reference Guide - Page 13
    19. Select your Username from the Radio User Permission box and click Permit. 20. When you see your Username in the Permitted Users field, click OK. 12
  • Icom RS-BA1 | Quick Reference Guide - Page 14
    Icom radio, Click Auto for COM Port/Audio Setting. 22. When setting a COM port manually, click the Manual Checkbox and select your COM Port in the COM Port Number field. 23. You can look up your COM Port number in the Device Manager window
  • Icom RS-BA1 | Quick Reference Guide - Page 15
    24. When using a USB headset/mic, select your headset under AF Input / MOD Output Device. Your computer should auto detect your speakers. 25. Click OK. 26. Click the Radio List tab and you will see your radio. 27. Select Radio Operation.
  • Icom RS-BA1 | Quick Reference Guide - Page 16
    28. Select your radio and click Connect. 29. Click OK on the Remote Utility Box (Com port number can be looked up in the Device manager). 15
  • Icom RS-BA1 | Quick Reference Guide - Page 17
    and that supports the RS-­‐BA1. x Reboot your computer, sometimes the COM Port (regular and virtual) requires a PC reboot for complete installation. x Audio issues can be resolved by selecting the right Output/Input Audio Device in the Settings window (below
  • Icom RS-BA1 | Quick Reference Guide - Page 18
    Setting up the RS-BA1 Remote Control Software 1. Verify that the Remote Control software is turned Off. CLICK 2. Click Option and select Connect Setting ... CLICK 17
  • Icom RS-BA1 | Quick Reference Guide - Page 19
    3. At the Connect Setting window, click Model and select your radio (verify the revision number). 4. Click Remote Utility and select your radio. 5. Click COM Port to select your port 6. Enter the address for your model radio in the CI-­‐V address
  • Icom RS-BA1 | Quick Reference Guide - Page 20
    8. Turn the Remote Control Software on. Wait for the software to change its frequency. 19
  • Icom RS-BA1 | Quick Reference Guide - Page 21
    Accessing the RS-BA1 Remotely over the Internet The following steps are for the Remote Base Station computer only. 1. Click Server List. 2. Click Add. 3. Enter following information: Enter your Computer Name Enter your Base Station Network global IP* Enter
  • Icom RS-BA1 | Quick Reference Guide - Page 22
    4. You have now created a Server on your Remote computer to talk to your Base Station network. 5. Select Server List. 6. Click Connect. 21
  • Icom RS-BA1 | Quick Reference Guide - Page 23
    If connection is successful, you will see the following window. CONNECTING means you are connected. 7. Click Radio List and you will see your radio come up. 22
  • Icom RS-BA1 | Quick Reference Guide - Page 24
    8. Click your radio. 9. Click Settings. 10. Click Virtual Com Port Number and select your virtual COM Port ( You can look up your Virtual Comport in the Device Manager). 23
  • Icom RS-BA1 | Quick Reference Guide - Page 25
    11. Click Save. 12. Click Connect. 13. Click OK on the Remote Utility window. 24
  • Icom RS-BA1 | Quick Reference Guide - Page 26
    If you see on the window your connection is successful. 14. Open the RS-­‐BA1 Remote Control software on the Remote Station computer and set it up as described in Setting up the RS-­‐BA1 Remote Control Software. 25
  • Icom RS-BA1 | Quick Reference Guide - Page 27
    the OFFLINE error on the remote computer Utility Software if the Remote Utility software on the Base Station computer is not running. In order to use the Radio remotely (over IP), you should have the Remote Utility running (but Not Connected). You
  • Icom RS-BA1 | Quick Reference Guide - Page 28
    0JVT(TLYPJH0UJ;OL0JVTSVNVPZHYLNPZ[LYLK [YHKLTHYR VM 0JVT 0UJ (SS V[OLY [YHKLTHYRZ HYL [OL WYVWLY[`VM[OLPYYLZWLJ[P]LV^ULYZ 2380 116th Ave NE, Bellevue WA, 98004
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
rs-ba1
remote control
software
quick reference guide