Icom VE-PG3 Precautions

PRECAUTIONS

■

For the AC adapter

R

WARNING! NEVER

use other than the VE-PG3. This

may result in an electrical shock, cause a fire or damage

the AC adapter.

R

WARNING!

Connect the adapter into an outlet

between 100 V and 240 V AC. Otherwise, this may result in

an electrical shock, cause a fire or damage the AC adapter.

R

WARNING! NEVER

install the AC adapter to wet place

where is outside or near the humidifier. This may result in an

electrical shock, cause a fire or damage the AC adapter.

R

WARNING! NEVER

put something heavy on the AC

adapter cable. This may result in an electrical shock,

cause

a fire or damage the AC adapter.

R

WARNING! NEVER

modify, bend by force, twist,

pull or heat the AC adapter’s cable. This may result in an


R

WARNING! NEVER

touch the AC adapter with wet

hands. This may result in an electrical shock or damage the

AC adapter.

R

WARNING! NEVER

use the AC adapter when it can

not closely insert into the AC outlet. This may result in an


R

WARNING!

Use and place the AC adapter and

connection cable to avoid inadvertent use by children. This

may result in an electrical shock or

cause injury

.

■

Other precautions

•

When operating the PC or external device, see those

instruction manuals for details.

•

The supplied AC adapter may at some time need to be

replaced, depending on its life expectancy. The life of

an AC adaptor differs according to the environment or

condition in which the adaptor is used.

We recommend replacement when it has been used for

approximately 5 years (When used under the ambient

temperature of 25 °C; 77°F). Contact your local dealer for

details.

• VE-PG3 supports only IPv4. IPv6 is not supported.

FCC INFORMATION

CAUTION:

Any changes or modifications not expressly

approved by the party responsible for

compliance could void the user’s authority

to operate the equipment.

NOTE:

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause

harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and

receiver.

•

Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician

for help.

ABOUT CE

This equipment complies with the essential

requirements of the 2004/108/EC directive for

Electromagnetic Compatibility.

■

For the VE-PG3

R

WARNING! NEVER

use other than the specified AC

adapter. This may result in an electrical shock, cause a fire

or damage the VE-PG3.

R

WARNING! NEVER

use non-specified accessories or

options. This may result in an electrical shock, cause a fire


R

WARNING! NEVER

connect the AC adapter to other

than the [DC] jack on the VE-PG3 rear panel. This may

result in an electrical shock, cause a fire or damage the

VE-PG3.

R

WARNING! NEVER

disassemble, modify or repair the

VE-PG3. This may result in an electrical shock, cause a fire


R

WARNING! NEVER

install the VE-PG3 in a wet place

or outside. This may result in an electrical shock, cause a

fire or damage the VE-PG3.

R

WARNING! NEVER

operate or touch the VE-PG3 with

wet hands. This may result in an electrical shock or damage

the VE-PG3.

R

WARNING! NEVER

connect the ground terminal to a

gas or electric pipe. This may result in an electrical shock or

cause a fire.

R

WARNING!

NEVER

use the VE-PG3 during a thunder

and lightening storm. Using it may result in an electrical

shock, cause a fire or damage the VE-PG3. Always

disconnect the AC adapter before any storm.

R

WARNING!

Immediately disconnect the AC adapter

if the VE-PG3 emits an abnormal odor, sound or smoke.

Contact your Icom dealer or distributor for advice.

CAUTION: NEVER

put the VE-PG3 in any unstable place

(such as on a slanted surface or vibrated place). This may

cause injury and/or damage to the VE-PG3.

CAUTION:

NEVER

install the VE-PG3 in

a place without

air vents. Heat dissipation may be reduced, and

this could

damage the VE-PG3

.

CAUTION:

Always place the VE-PG3 in a secure place to

avoid inadvertent use by children.

CAUTION: DO NOT

use or place the VE-PG3 in areas

with temperatures below 0

ç

(+32

ƒ

) or above +40

ç

(+104

ƒ

).

CAUTION: DO NOT

place the VE-PG3 in direct sunlight.

This could damage the VE-PG3.

CAUTION:

DO NOT

use the VE-PG3 in strong magnetic

fields or in an area with high static electricity.

This could

damage the VE-PG3.

CAUTION:

Disconnect the AC adapter when you will not

use the VE-PG3 fo

r a long period of time.

CAUTION:

DO NOT

use harsh solvents such as benzine

or alcohol to clean the VE-PG3, as they can damage the

VE-PG3’s surfaces. If the VE-PG3 becomes dusty or dirty,

wipe it clean with a dry, soft cloth.

CAUTION:

Use only the specified cable to connect a

transceiver or repeater to the VE-PG3. Using another cable

could cause damage to the VE-PG3 or to the transceiver or

repeater.

PRECAUTIONS

ABOUT THE OPTIONAL CONNECTION CABLE

PRECAUTIONS

Thank you for purchasing this Icom product. The VE-PG3

RoIP GATEWAY is designed and built with Icom’s IP

network technology. We hope you agree with Icom’s

philosophy of “technology first.” Many hours of research

and development went into the design of your VE-PG3.

IMPORTANT

READ ALL INSTRUCTIONS

carefully

and completely

before using the VE-PG3.

SAVE THESE INSTRUCTIONS

—

These instructions

contain important safety and operating instructions for the

VE-PG3.

EXPLICIT DEFINITIONS

WORD

DEFINITION

R

WARNING!

Personal injury, fire hazard or electric

shock may occur.

CAUTION

Equipment damage may occur.

NOTE

If disregarded, inconvenience only. No risk

of personal injury, ﬁre or electric shock.

Before connecting cables, see the cable's manual and the

sticker on the bottom of the VE-PG3 for port information.

•

Verify that both the VE-PG3 and connected devices are

turned OFF when connecting or disconnecting the cable.

•

Hold the connector body when connecting or

disconnecting them.

•

When other cables are connected, you can use needle-

nose pliers to carefully insert or remove connectors.

• Never bend or pinch the cable.

• Never place a heavy object on the cable.

• Never touch the cable with wet hands.

•

Always connect the cable correctly. An incorrect connection

could damage the VE-PG3 and/or the transceiver.

VE-PG3

（

bottom view

）

Connection cable

（

optional

）

Port information on the sticker

Sticker

A

B

RoIP GATEWAY

Icom VE-PG3 Precautions

Icom VE-PG3 Manual

Icom VE-PG3 manual content summary: