Home » Image Fitness Manuals » Exercise and Fitness » Image Fitness Renew 631 Spa » Manual Viewer

Image Fitness Renew 631 Spa User Manual

Image Fitness Renew 631 Spa Manual

Get Image Fitness Renew 631 Spa PDF manuals and user guides

View all Image Fitness Renew 631 Spa manuals

Add to My Manuals
Save this manual to your list of manuals

Image Fitness Renew 631 Spa manual content summary:

Image Fitness Renew 631 Spa | User Manual - Page 1
you have questions, or if there are missing parts, we will guarantee complete satisfaction through direct instructions in this manual before using this equipment. Save this manual for future reference. USERʼS MANUAL Visit our website at www.workoutwarehouse.com new products, prizes, fitness
Image Fitness Renew 631 Spa | User Manual - Page 2
Safety Instructions 3 Before You Begin 6 Choosing a Location for the Hydrotherapy Spa 7 Assembly 8 Using the Hydrotherapy Spa 10 Spa Shell Diagram 11 Using the Controls 12 Maintenance 13 Troubleshooting 16 Part List 18 Exploded Drawing 19 Ordering Replacement Parts Back Cover Limited
Image Fitness Renew 631 Spa | User Manual - Page 3
you select for the spa will support this weight, plus the weight of the occupants. 6. Inspect and tighten all parts regularly. Replace any worn parts immediately. 7. DANGER-Risk of injury: Do not remove or alter the covers on the suction fittings. Never operate the hydrotherapy spa if the suction
Image Fitness Renew 631 Spa | User Manual - Page 4
. DANGER-To reduce the risk of drowning: • Never use the hydrotherapy spa alone. • Children should not use the spa unless they are supervised by an adult. • Keep pets away from the spa at all times. • Always replace and lock the spa cover when the spa is not in use. 26. WARNING-To reduce the risk of
Image Fitness Renew 631 Spa | User Manual - Page 5
DECAL PLACEMENT: Locate the decals shown below and familiarize yourself with the information on the decals. WARNING: Read all instructions before using the hydrotherapy spa. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. SAVE
Image Fitness Renew 631 Spa | User Manual - Page 6
throughout the body. The RENEW 631 hydrotherapy spa gives you the specialized treatment you need to feel your best. For your benefit, read this manual carefully before using the hydrotherapy spa. If you have questions after reading this manual, call our Customer Service Department toll-free at
Image Fitness Renew 631 Spa | User Manual - Page 7
It must be able to support the weight of the spa when it is filled with water, plus the weight of the occupants. The spa weighs approximately 2,750 pounds that is built flush with the top of the spa, provided you leave access to the motor for service. 10.Be sure to note any other considerations,
Image Fitness Renew 631 Spa | User Manual - Page 8
beginning assembly, carefully read the following information and instructions: • Place all parts in a cleared area and remove the packing materials from the spa shell. Do not dispose of the packing materials until assembly is completed and the spa is operating. • During assembly, make sure that all
Image Fitness Renew 631 Spa | User Manual - Page 9
spa shell. Using a damp cloth, wipe the spa shell clean. Before filling the spa, make sure that it is in the desired position and that there is room to service the spa. Once the spa hold the strap on the opposite side of the Spa Cover tight.) The Spa Cover must be tight. Do not place the Buckle
Image Fitness Renew 631 Spa | User Manual - Page 10
to the instructions on the inside of the electronics package for information about connecting the spa to a 240-volt power source. Once the spa is CONTROLS on page 12). SECURING THE SPA COVER ON THE SPA To secure the spa cover, snap the latches on the spa cover into the buckles on the cedar panels
Image Fitness Renew 631 Spa | User Manual - Page 11
. E. The whirlpool jet provides a powerful foot massage. bring water into the pumps in order to operate the system. Never operate the spa without the suction covers in place. K. The twelve directional jets can be pivoted to direct their water flow. L. The two seven-port jets return heated water
Image Fitness Renew 631 Spa | User Manual - Page 12
180°, allowing it to be read from inside or outside of the spa. Pump 1 Button: Turns the spa jets labeled B and C (at the left) on and off. from 80°F to 104°F. The water heats at about 6°F per hour with the cover on. Use a medical or other accurate thermometer to check the temperature of the water
Image Fitness Renew 631 Spa | User Manual - Page 13
- ING AND CLEANING THE FILTER on this page). • Replace the filter if needed (see ORDERING REPLACEMENT PARTS on the back cover of this manual). Monthly • Clean the spa cover (see MAINTAINING THE SPA COVER on this page). • Soak the filter for two hours in a trisodium phos- phate (TSP) solution. Rinse
Image Fitness Renew 631 Spa | User Manual - Page 14
level, between 7.2 and 7.8, in the hydrotherapy spa. Severe problems can occur when the pH balance is not maintained parts in the spa jet unit. Also, the sanitation agents in the water will not be effective if the pH level is not properly maintained. Damage caused by improper pH levels is not covered
Image Fitness Renew 631 Spa | User Manual - Page 15
(see page 13). 9. A licensed, qualified electrician should disconnect the power from the 240-volt power source. 10. Reattach the access panel and the spa cover. REPLACING THE LIGHT BULB If the underwater light burns out, you will need to remove the pump access panel to replace it (see ATTACHING AND
Image Fitness Renew 631 Spa | User Manual - Page 16
department. b. The pump may have a bad bearing. Contact our customer service department. 6. SYMPTOM: THE WATER DOES NOT HEAT a. Make sure that the hydrotherapy spa is fully covered with the spa cover. The spa cover must be tight for the water to heat. Set the air control to low. The water will
Image Fitness Renew 631 Spa | User Manual - Page 17
the pump button once. Note: If the actual water temperature is below the set temperature, or if the spa is running a filter cycle, the heater pump/motor will not shut off. 11. SYMPTOM: NO AIR FLOWS above, or if the console does not function properly, contact our customer service department. 17
Image Fitness Renew 631 Spa | User Manual - Page 18
2 33 1 34 2 35 2 36 4 37 1 Description Thermometer Fitting Long Access Panel Whirlpool Jet One-speed Motor/Pump* Short Access Panel Rotator #10 x 2" Sheet Metal Screw Filter Cover #10 x 1 1/2" Sheet Metal Screw One-speed Motor Power Cord Spa Cover Pivot Ring Jet Pump/Motor O-ring Console with
Image Fitness Renew 631 Spa | User Manual - Page 19
Exploded Drawing-Model No. IMHS63103/IMHS63104 11 R0503A 39 1 50 51 24 57 57 56 55* 25 50 50 51 51 51 24 23 24 57 24 23 4* 13 50 51 24 51 23 24 23 22 13 19 39 48 41 4* 13 13 28 27 9 10 28 22 27 52 53* 24 24 10 9 9 52 19 24 10 58 58 38 54 14 40 30 3 36 12
Image Fitness Renew 631 Spa | User Manual - Page 20
IMAGE® RENEW 631 hydrotherapy spa) • The SERIAL NUMBER of the product (see the front cover of this manual) • The KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART LIST and the EXPLODED DRAWING on pages 18 and 19) Limited Warranty ICON Health & Fitness its authorized service centers.