Image Fitness 8.25 Elliptical English Manual - Page 7
Screw 70, an M8 Washer 64, and a Pivot Cover
View all Image Fitness 8.25 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
4. Identify the Left Pedal Arm (21), which is marked with a sticker. Attach a Pedal (19) to the Left Pedal Arm with three M4 x 19mm Screws (68) and three Star Washers (85). Attach the other Pedal (not shown) to the Right Pedal Arm (not shown) in the same way. 4 21 85 19 85 68 5. Apply a generous amount of grease to the Pivot Axle (16). Then, apply a small amount of grease to two Wave Washers (27). While another person aligns the Upper Body Legs (6) with the Upright (2) as shown, insert the Pivot Axle (16) into the Upper Body Legs and the Upright. Be careful not to damage the Upper Wire Harness (18) with the Pivot Axle. Place a Wave Washer (27) on each end of the Pivot Axle (16). Then, tighten an M8 x 25mm Patch Screw (70), an M8 Washer (64), and a Pivot Cover (14) into each end of the Pivot Axle. 5 2 Grease 27 64 18 Grease 14 70 64 27 16 6 14 70 6 7