InSinkErator Invite H990-SS Specifications
InSinkErator Invite H990-SS Manual
 |
View all InSinkErator Invite H990-SS manuals
Add to My Manuals
Save this manual to your list of manuals |
InSinkErator Invite H990-SS manual content summary:
- InSinkErator Invite H990-SS | Specifications - Page 1
Specification Instant hot water dispenser(s) shall be InSinkErator Model H990-SS with 2/3-gallon stainless steel tank, adjustable temperature from 160°F to 210°F and instant, self-closing hot valve. Warranty: 3-year parts and in-home service. * The complete InSinkErator warranty is included in the
-
1
 |
 |
11"
6-1/8"
6-3/4"
6-11/16
"
5-5/8"
NOTE: Max counter thickness is 3".
Minimum 1-1/4" required
from sink hole center
to backsplash
4-1/4"
1/4" Incoming
Water Supply
Inlet Tube
Flexible
Outlet Tube
Flexible
Vent Tube
The Next
Necessity
™
Submittal Sheet
Job Specifications
Easy-grip handle to dispense instant
near-boiling 200˚F water effortlessly
Instant Hot Water Dispensers
H990-SS
HWD394-11F-45-02
•
Hot Only
– Dispenses near-boiling 200°F
•
35% more near-boiling water from larger
2/3-gallon stainless steel tank
•
Easy to adjust temperature control
•
Tool-free tank connections and dry start
protection to ease installation
•
Provides 60 cups/hr of near-boiling water
•
3-Year
We Come To You
®
In-Home
Service Warranty*
•
115 volts, 750 watts, 6.25 amps
•
A.D.A. compliant
•
Available in these designer finishes:
chrome, white, and biscuit
Specifications
Capacity
Electrical
Thermostat
Insulation
Valve
Shipping Weight
Recommended
Supply Pressure
Required
Hole Diameter
2/3-gallon stainless
steel tank dispenses
60 cups of 200˚F
water per hour
Snap-action,
adjustable from
160˚F to 210˚F
(factory pre-set
at 200˚F)
Meets U.L. 94HF-1
flammabiltiy
specification
Instant, self-closing
30-125 psi
Approximately
7.4 lbs.
1-1/4" – 1-1/2"
standard sink hole
115 volts A.C., 750
watts, 6.25 amp
heating element
with grounded
three (3) prong plug
Printed in USA
1-800-558-5700
www.insinkerator.com
The Emerson logo is a trademark and
service mark of Emerson Electric Co.
InSinkErator may make improvements and/or
changes in the specifications at any time, in its sole
discretion, without notice or obligation and further
reserves the right ot change or discontinue models.
© 2011 InSinkErator, a division of
Emerson Electric Co. All Rights Reserved.
Complies with Lead Plumbing Law
Dimensions
Sample Specification
Instant hot water dispenser(s) shall be
InSinkErator Model H990-SS with
2/3-gallon stainless steel tank, adjustable
temperature from 160°F to 210°F and
instant, self-closing hot valve.
Warranty:
3-year parts and in-home service.
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
US Pat. D532,497 (tank enclosure)