Insignia NS-26L450A11 Quick Setup Guide (English)

26"/32" 1080p LCD HDTV

QUICK SETUP GUIDE

NS-26L450A11/NS-32L450A11

Thank You

for purchasing this fine Insignia television.

We hope you enjoy the quality and reliability

of this product for years to come.

_______________________________

Universal remote control TV codes

(for all Insignia TVs manufactured after Jan. 1, 2007)

Philips

PHDVD5, PH5DSS,

PMDVR8, PDVR8

115

DirectTV

RC23

10463

RCA

RCU807

135

One for All

URC-6690

0464

Sony

RM-VL600

8043

Comcast

M1057

0463

Dish Network

VIP508, VIP622

720

Motorola

DRC800

0463

TIVO

Series 3, HD

0091

Universal remote control makers and models

Set-top box makers and models

TV stand and 3 screws

Quick Setup Guide

Remote

control sensor

Power

indicator

Remote control

and 2 AA

batteries

Remote

control holder

Component

cable

Audio

cable

AC

power

cord

Cleaning

cloth

Front features

Installing the stand

1

Carefully place your TV screen face-down on a cushioned, clean surface to

protect the screen from damages and scratches.

2

Align the stand on the TV base, then insert the metal tabs on the stand

into the designated slots on the TV base

3

Secure the stand to the screen with three screws provided.

Installing a wall-mount bracket

1

Carefully place your TV screen face-down on a cushioned, clean surface to

protect the screen from damages and scratches.

2

Remove the three screws holding the TV to its stand.

3

Remove the stand column, then install the TV base cover to keep dirt and

dust from entering your TV.

4

Secure the wall-mount bracket to the back of your TV using the screws

provided with the bracket.

Setting up your remote control

1

While pressing the release latch on the battery compartment cover on the

back of the remote, lift the cover off the remote.

2

Insert two AA batteries into the battery compartment. Make sure that the

+ and – symbols on the batteries align with the + and – symbols in the

battery compartment.

3

Replace the cover.

Programming your existing universal remote control

To program your existing universal remote control to work with your new

Insignia TV, see the table below for common codes. If you have problems

programming your remote or need a different remote control code, visit

www.insigniaproducts.com for the latest remote control code information.

See your manual to program your universal insignia remote to control other

devices.

Connecting a DVD or Blu-ray DVD player, cable

box, satellite receiver, or game station

Using HDMI (best)

Using

component (better)

Using composite (good)

Connecting an antenna

Connect a

coaxial cable (not included) to the

ANT/CABLE IN

jack on the

back of your TV and the RF OUT jack on the antenna.

Insignia NS-26L450A11 Quick Setup Guide (English)

Insignia NS-26L450A11 Manual

Insignia NS-26L450A11 manual content summary: