Insignia NS-2BRDVD Firmware Installation Guide (English)

Firmware update: Download/Install instructions for NS

‐

2BRDVD & NS

‐

BDLIVE01

Blu

‐

ray DVD players.

System requirements: a computer with an open USB port, USB flash drive (stick), broadband internet

access and operating software of Windows XP and newer or Mac OS 10.3 or newer. This option is not

recommended with dial

‐

up or DSL service with a bit rate lower than 256kbps. If the instructions

provided below do not help, call Insignia Customer Support at (877) 467

‐

4289 for assistance.

First: Download the compressed update file

1.

Click on the link to the file: if and save the file to your desktop.

Note: File size is approximately 37 MB. Estimated download time is 3

‐

4 minutes (download time

will vary based on your connection speed).

2.

Insert a blank USB flash drive (stick) that is formatted in FAT32 into the open USB port on your

computer (USB flash drive must not contain any other files etc.).

3.

Uncompress the file from your desktop, and then save the uncompressed files to your USB flash

drive (stick).

4.

After saving the firmware to your USB flash drive; remove the USB flash drive from your

computer.

Second: Upgrading the Player Software with a USB Flash Drive (Stick)

1.

Turn on the player and eject any disks that may be in the player, and remove any USB flash drive

already inserted in the player.

2.

Insert the USB flash drive containing the firmware that was downloaded into the player’s USB

port located on the back of the player.

3.

After the player has recognized the USB flash drive (stick), a screen similar to the one below will

appear: