Insignia NS-55E790A12 User Manual (English) - Page 16
Connecting power, Connecting a cable or satellite box, Using HDMI best
View all Insignia NS-55E790A12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Connecting power To connect the power: • Plug the AC power cord into a power outlet. NS-55E790A12 Insignia 55" LED-LCD HDTV, 120 HZ 1080p Using HDMI (best) To connect a cable or satellite box using HDMI: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable box. 3 Connect an HDMI cable (not included) to one of the HDMI jacks on the back of your TV, then plug the other end of the cable into the HDMI jack on the cable or satellite box. Cable or satellite box HDMI cable Notes • • • Your TV should only be operated from the power source indicated on the label. Always unplug the AC power cord from the power outlet when you will not be using your TV for an extended period of time. The AC power cord is permanently attached to the back of your TV. Do not try to pull it out. Connecting a cable or satellite box Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available. For more information, see "What connection should I use?" on page 11. Back of TV AUDIO OUT DIGITAL OUTPUT ANT /CABLE VGA PC / DVI AUDIO IN HDMI 1 / DVI HDMI 2 (ARC) 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Go through the setup wizard on page 22. Notes An HDMI cable carries both audio and video. You do not need to use any audio cables. 12 www.insigniaproducts.com